电风扇旋钮注塑模设计（含全套CAD图纸）.doc

买文档后送图纸，QQ 194535455 摘 要 模具是利用其特定形状去成型具有一定形状和尺寸的制品的工具，按制品所采用的原料不同，成型方法不同，一般将模具分为塑料模具，金属冲压模具，金属压铸模具，橡胶模具，玻璃模具等。因人们日常生活所用的制品和各种机械零件，在成型中多数是通过模具来制成品，所以模具制造业已成为一个大行业。在高分子材料加工领域中,用于塑料制品成形的模具,称为塑料成形模具,简称塑料模.塑料模优化设计,是当代高分子材料加工领域中的重大课题。 本次毕业设计是电风扇旋扭，它所要达到的要求：要能耐高温，绝缘性要好，耐气候性强，刚性，韧性佳，通过对产品的各种性能分析，选用材料ABSTRACT Mold is used to shape the specific shape of a certain shape and size of products tools used by the products of different raw materials, different methods shaped general layout will be divided into plastic molds, metal stamping dies, metal die-casting molds, rubber molds, glass molds. It is used in the daily life of products and various mechanical parts, mostly in the shape of heads through to finishe products, it has become a major instrument manufacturing industry. In the field of macromolecular materials for plastic products shape the instrument, known as plastic molding shape. Plastic molds optimized design is contemporary in the field of macromolecular materials processing major issue. The graduation design is fanner knob and, it will reach request: to high temperature, insulation can strong sex is better, resistance to climate, rigid, toughness good, through various performance analysis of products, choose materials for ABS, the thickness of plastic parts for 1mm, tolerance grade IT5 level for. It is used to regulate the speed and timing, can satisfy peoples hot weather blowback for wind and length of requirements, while also play beautiful role. Key words ：Plastic mould; materials; Fanner knob 目录 前言 1 1 塑件的工艺性分析 2 2 分型面位置分析和确定 4 2.1型腔数目的确定 4 2.2型腔的布局 4 2.3分型面设计 4 3 注射机的选择及工艺参数校核 6 3.1注塑机的选择 6 3.2工艺参数的校核 6 4 成型零件的设计 8 4.1型腔的结构设计 8 4.2型腔的工作尺寸计算 9 4.3型芯的结构设计 9 5 模架的设计 12 6 合模导向机构的设计 13 6.1导柱的设计 13 6.2导套的设计 14 7 推出机构的设计 15 8 浇注系统与排溢系统的设计 19 8.1主流道的设计 19 8.2分流道的布置 20 8.3浇口的设计 20 8.4浇口位置的确定 21 8.5排溢系统的设计 22 9 温度调节系统的设计 24 10 模具的工作过程 26 10.1模具的装配 26 10.2模具的装配顺序 26 10.3模具的动作过程 27 结束语 28 参考文献 29 致 谢 30 前言 光阴似，大学年的学习一晃而过，为具体的检验这年来的学习效果，综合检测理论在实际应用中的能力，除了平时的考