CC1021PS05汽车变速器的设计（含全套CAD图纸）.doc

买文档后送图纸，QQ 194535455 摘 要 本次设计的题目是。其基本功用是 关键词：变速器;锁环式同步器;传动比;齿轮;设计 ABSTRACT The design of the subject is Nissan Pick-up thestrals sharpness triaxial type transmission design. Transmission of transmission mechanism and manipulate the transmission mechanism, its basic function is changed, expand the rotation drive transmission torque and speed range, in order to adapt to the changing conditions, also make the engine driving in the favorable conditions work, In the engine crankshaft direction invariable under the premise of driving the car can reverse, Use neutral interrupt power to make the engine can start, idle, and facilitate transmission shift or power output. Using the transmission of transmission oart has two outstanding advantages: one is the direct transmission efficiency, the wear and tear of noise and minimum, The center distance of small gear cases can still get larger gear transmission. The transmission has five forward and one reverse, and through the lock ring type synchronizer to realize the shift. This design is discussed in the overall structure, design of the gear and finish the checking and calculating and axial CAD drawing, etc. Key wordS：Transmission, Locking ring type synchronizer,Gear ratio, Gear,design 目 录 摘要……………………………………………………...…………………..……….I Abstract………………………………………………………………………...........II 第1章 绪论…………………………………………...…………………..……….1 1.1 汽车变速器概述.……………………………...…………………………...1 1.2 汽车变速器设计的目的和意义…………………………………………...1 1.3 汽车变速器国内外现状和发展趋势……………………………………...2 1.3.1 变速器国内外的现状……………………………………………….2 1.3.2 汽车变速器的发展趋势………………………………………….…3 1.4 手动变速器的特点和设计要求及内容………………………….……..…3 1.4.1 手动变速器的特点………………………………………………….3 1.4.2 手动变速器的设计要求…………………………………..………...4 1.4.3设计的主要内容………………………………….………….………4 第2章 变速器主要参数的选择和齿数分配…………………………….....5 2.1设计所依据的主要技术参数………………………………………………5 2.1.1变速器各档传动比的确定…………………………………………..5 2.1.2中心矩………………………………….………….…………………8 2.2齿轮参数………………………………….………….……………………..8 2.2.1模数………………………………………………………………......8 2.2.2压力角………………………………………………………………..9 2.2.3螺旋角……………………………………