塑料衣架的模具设计（全套CAD图纸）.doc

买文档后送图纸，QQ 194535455 摘 要 注射成型是塑料成型的主要方法之一，其优点是可以一次成型形状复杂的塑件，生产效率高。Pro/E（Pro/engineer）软件是目前国内在产品造型设计和模具设计中应用广泛的软件之一，它有其专门的注塑模设计模块，通过利用其方便快捷的模架库外挂（EMX4.1），模具设计中的一些繁琐工作变得尤为简单。 在本设计中，三角衣架作为大批量生产的日常用品适宜采用注射方法成型，通过对塑件进行结构和工艺性分析，设计出一套一模两腔的塑料注射模具，并合理编写出成型零件的制造工艺。在设计中，Pro/E软件的应用贯穿到了整个设计过程，首先利用Pro/E软件的零件模块进行三角衣架实体模型的创建，然后利用其制造模块对模型进行分模、型芯的设计、浇注系统的设计，最后利用其模具外挂生成标准模架，再进行顶杆、冷却系统、支撑柱等综合布置。在模具的设计过程中，一些重要的尺寸（如壁厚，顶杆直径，流道尺寸等）都经过了理论计算或取一个合理的经验数值，并进行了强度校核和流道剪切速率的校核。模具各部分结构设计好后，利用创建好的模型生成Pro/E工程图并将其导入autoCAD中做出符合国标的装配图及部分零件图，跳过了直接绘制工程图中大量繁琐的工作，降低了设计工作量。该设计充分体现了Pro/E软件在模具设计的优越性。 关键词：三角衣架塑件 注射模 Pro/E EMX4.1  The Designing of Triangular Plastic Hanger Mold Abstract: Injection molding is one of the main methods of plastic forming . It can forming plastic parts of complex at a time and high-efficiency as well . Pro / E (Pro / engineer) software is currently one of widely used software in product design and mold design , which has its own dedicated injection mold design module , besides , through using EMX4.1 , some of the tedious work is particularly simple in mold design . In this design , triangular plastic hanger as a daily necessities is suitable for injection molding . After the analysis of structure and process performance for plastic parts , a two-cavity plastic injection mold is designed , at the same time , a reasonable manufacturing process of molding parts is made . In the design , Pro/E software’s applications throughout the entire design process , including the model creation and sub-module of triangular plastic hanger by using the parts module and manufacturing module . In addition , core design , gating system design , moldbase generation , and standard moldbase generation by using EMX4.1 . After that , the layout about mandril , cooling systems , supporting column are designed . In the process of mold creating , some important dimensions like wall thickness of mold cavity , flow size , and mandrel diameter are determined by theoretical calculations or experience val