雕刻机运动系统的毕业设计（含CAD图纸全套）.doc

买文档后送图纸，QQ 194535455 摘 要 方便，结构简单、新颖，制造成本低等优点，可用于的影响。 ：，ABSTRACT Production technology of engraving machine has become mature and widely been used in many fields. The sculpture technology is used in the construction of the building decoration, small signs in front of the store, many products and logo nameplate. But the price of engraving machine is high; to be able to increase its penetration rate, design a mechanical system which is cheaper and brevity has a very important theoretical and practical value. This article briefly introduced the origin and the state-of-the –art of the engraving machine, analysed the similar characteristics of sculpture both at home and abroad, explained the functions and scope of use of the engraving machine. Firstly,a motion system design ideas was got by comprehensive using the knowledge such as mechanical design and manufacturing and processing technology. Secondly, the carving of the layout of the engraving machine are discussed and identified. The movement system of the sculpture, including the main movement system and feed movement.The main campaign directly to the electrical system used knives, eliminating the middle transmission, and the Progressive Movement system is used to the stepper motor driven ball screws so that components in the rails On the pan to achieve three-axis linkage. Finally, Selection of the main motor, ball screw, the stepper motor and rails, and other major components of a detailed are designed and calculationed. The engraving machine is easy to install, simple structure, new, and low cost manufacturing, can be used for small and medium-sized carving machine, the engraving machine with little impact on prices. Key words: engraving machines, motor system, 3D 目 录······································································································1 1.1 雕刻机的概述···········································································1 1.2 设计研制的雕刻机特点·········································