湖南12型拖拉机离合器壳体落料首次拉深复合模设计（含CAD图纸全套）.doc

买文档后送图纸，QQ 194535455 摘 要 本次的模具设计为离合器壳体落料、首次拉深复合模设计。离合器壳体才用的材料是20号钢，厚度3mm，该材料强度低，韧性、塑性和焊接性较好，用途非常广泛。适用于制造汽车、拖拉机及一般机械制造业中建造部分零件。如汽车上的手刹蹄片、杠杆轴、传动被动齿轮及拖拉机上的凸轮轴、悬挂均衡器轴、离合器壳体等。 首先对零件进行了工艺性分析，确定冲压所需的如落料、拉深，整形等一系列工序。其次经过计算分析确定工艺方案完成该模具的排样设计，凸、凹模工作部分的设计计算，还有模具结构和工艺零件设计，选择合适的模具材料和合理的加工工艺。在设计过程中，还利用CAD绘制了一套模具装配图和零件图。 关键词 ：离合器壳体；落料；拉伸；复合模；设计 ABSTRACT The mold design for the clutch housing blanking, drawing the first time, compound die design. Clutch housing material is used only 20 steel, the thickness of 3mm, the low material strength, toughness, ductility and good weldability, uses very extensive. For the manufacture of automobiles, tractors and general construction machinery manufacturing industry in some parts. If the cars hand brake shoe, lever shaft, transmission gears and tractor passive camshafts, suspension equalizer shaft, clutch housing and so on. First of all parts of the process of analysis, to determine if the required blanking press, drawing, shaping and a series of processes. Second, after completion of the program calculation process to determine the layout of the mold design, convex and concave parts of the mold design and calculation work, as well as part design mold structure and process, select the appropriate mold material and reasonable process. In the design process, also used CAD drawing die assembly and part drawings Key words Clutch housing；Blanking；Tensile；Compound Die；Design 目 录 前言……………………………………………………………………………………1 1 零件的工艺性 ……………………………………………………………………2 1.1 原始资料……………………………………………………………………2 1.2 零件材料及其冲压工艺性分析……………………………………………2 1.3 确定工艺方案和模具形式 …………………………………………… …4 2 主要工艺参数的计算 ……………………………………………………………5 2.1 落料尺寸的计算……………………………………………………………5 2.2 确定排样方案………………………………………………………………7 2.3 计算拉深次数………………………………………………………………8 2.4 拉深冲压力的计算…………………………………………………………9 2.5 冲压设备的选择 …………………………………………………………11 3 模具设计…………………………………………………………………………12 3.1 模具结构的设计 …………………………………………………………13 3.2 模具的闭合高度 …………………………………………………………14 3.3 模具工作部分尺寸及公差计算 …………