220KV变电站电气二次部分设计毕业设计(论文).doc

毕 业 设 计 [论 文] 题 目： 某220KV变电站二次部分 摘 要 变电站保护配置方案设计和整定计算是变电站继电保护工作的重要内容，合理的方案设计和整定计算对保证变电站，乃至整个电力系统的安全稳定运行具有非常重要的作用。 本论文根据220kV变电所一次侧的配置要求，进行变电站设备保护方案设计和整定计算工作。根据变电站的工程实际，对变电站主要设备，包括变压器、母线等的保护特点和要求进行了分析，结合所采用的许继设备保护的功能特点，提出了一套完整的设备保护设计方案。论文阐述了保护方案的设计原则和保护功能配置情况。 设备保护的整定计算与所采用的保护原理密切相关，论文针对所选用保护装置的构成特点，对其保护原理和整定方法进行了研究分析，以充分发挥保护装置的总体性能。论文介绍了设备保护的基本原理，并对其整定计算方法进行了论述。 根据所提出的变电站设备保护的设计方案以及保护整定计算的基本原则和方法，论文阐述了整定计算的基本过程和主要结果，完成了变电站设备保护的整定计算，并经校验合格。论文的最后对本课题的研究工作与研究成果进行了总结。 关键词：变电站，保护设计，保护整定计算，变压器保护，母线保护 ABSTRACT Research of configuration design and setting calculation for substation element protection is a very important part of substation relay protection. A reasonable configuration design and setting calculation plays a very important role in a substation and even the whole power system. Element protection involving many device-level setting values,which is different from line protection. And the setting values is directly related to the protection principles and technologies. The paper starts configuration design and setting calculation for substation element protection bases on the application requirement of a substation. At first, the paper begins with a overview and a analysis on the research and present situation and development of the substation element protection, on this basis, the paper start a research on the protection of substation element, including transformer and bus-bar and so on. And then proposed a complete configuration design of element protection combined with the characteristics of the foreign general element protection. And the paper also describes the design principle of the protection scheme and the configuration situation of the protection functions. Based on the design scheme and basic principle and method of protection setting calculation of the substation element protection, the paper discusses the basic process and the primary results of the setting calculation, and then completes the setting calculation of the forei