模具设计与制造专业毕业论文--盖注塑成型工艺及模具设计.docVIP

摘 要 本设计题目为盖注塑模设计，体现了盒盖类塑料零件的设计要求、内容及方向，有一定的设计意义。通过对该零件模具的设计，进一步加强了设计者注塑模设计的基础知识，为设计更复杂的注塑模具做好了铺垫和吸取了更深刻的经验。 本设计运用塑料成型工艺及模具设计的基础知识，首先分析了塑件的成分及性能要求，为选取浇口的类型做好了准备；然后估算了塑件的体积，便于选取注塑机及确定型腔数量；最后分析了塑件的特征，确定模具的设计参数、设计要点及推出装置的选取。 本塑件体积较小，无需侧抽机构，因而模具设计也较简单。本模具才有顶杆推出机构脱模，结构合理可靠。 关键词：注塑模 盖 顶杆 工艺分析 模具结构 Abstract：The topic of this design is the shell cover stamps forming handicraft and design for die.The requirement，content and direction of the design of the stamps forminglate parts are embodied on this stamping die design. The designer’s foundation knowledge of the stamping die design is reinforced and is able to design more complex stamping die through the design. This design the elementary knowledge which designs using the stamping formation craft and the die, first has analyzed the work piece formed craft and the die forming structure to the workpiece quality influence. Introduced the shell cover filling piece stamping die design when must pay attention to the main point, through carries on the craft analysis to the workpiece, may determine the workpiece the formed processing uses set of superposable dies. Embarks from the control workpiece size precision, counter shell cover filling piece stamping die each main dimension has carried on the theoretical calculation, by determined each work components the size, designs from the die to the spare part processing craft as well as the assembly craft and so on carries on the detailed elaboration, and carries on each important components using CAD the design. Key words: Injection mould Cover Mandril process analysis Mold Construction 1绪 论 目前，随着我国改革开放步伐的进一步加快，中国正逐步成为全球制造业的基地，特别是加入WTO后，作为制造业基础的模具行业近年来得到了迅速发展。模具是工业生产的基础工艺装备，在电子、汽车、电机、电器、仪表、家电和通信等产品中，60%—80%的零部件都依靠模具成型。国民经济的五大支柱产业，即机械、电子、汽车、石化、建筑，都要求模具工业的发展与之相适应。模具生产水平的高低，己成为衡量一个国家产品制造水平高低的重要标志，在很大程度上决定着产品的质量、效益和新产品的开发能力。因此，我国要从一个制造业大国发展成为一个制造业强国，必须要振兴和发展我国的模具工业，提高模具工业的整体技术水平。我国模具近年来发展很快，据不完全统计，2003年我国模具生产厂点约有万多家，从业人员约50多万人，2004年模具行业的发展保持良好势头，模具企业总体上订单充足，任务饱满，2004年模具产值53