手机外壳注塑模设计【优秀机械专业论文】【全套带CAD图】.docVIP

精品机械毕业设计 答辩CAD图纸资料 优秀通过答辩 手机外壳注塑模具设计 摘? 要?：本是关于的形状较为复杂，所以模具设计中要考虑的因素有很多，除考虑它的出模、分型面，还需考虑它成型的质量，表面光洁度等。所以我们设计应认真分析塑料制品的结构，寻求最佳的设计方案成型设备的规格和型号分型面的选择很重要，制件不是平直表面，分型面的选择既要考虑不影响制件表面的美观，又要达到结构要求浇注系统的设计也很重要，在此次设计中我选浇口，并设有冷料穴。拉料杆采用形，这就解决了制品出模的问题。、、、、、、、、、、The design of the mobile shell mould Abstract: This topic is to design the mobile shell mold, which includes the structure design mould assist designing for manufacturing, and the working process of the injection mould of the front cover of the mobile shell set were introduced. Mobile shape so complicated that the mold design has a lot of factors to be considered , in addition to its ejector pin, parting surface, it needs to consider forming the quality of surface finish, and so on. Therefore, we should carefully design the structure of plastic products, find the best design options and choose the molding equipment specifications and models. It is very important, not the straight parts surface, parting surface of choice it is necessary to consider not affect parts of the surface appearance, but also to structural requirements. Pouring system design is also important in the design of the election, pin gate cold-slag well and Z-shape pin were chosen which are solved the problem of products to die. The structure design involve parting plane, cavity layout, old systems, heating cooling systems, the side core pulling mechanism structure, prop up the organization, drawing patterns and the design process of the main work pieces. The later use PRO/E to construct carries on the three dimensional modeling and to assemble the injection mould. The processing craft of the cavity of fixed plate of the base of the mobile shell are analyzed.The structure characteristic of this injection mould was a two-parting surface , and was a side core pulling mechanism. The mould was proved to be a clever design by production practice , the mould could be operated easily , the service life of the mould was long and the plastics parts produced