重钢新建轧钢工程水处理站可行性研究.pdfVIP

摘 要 为改善重庆城市环境污染，重钢钢铁产业将搬出主城区，迁往长寿江南镇新区。 通过搬迁，重钢可以优化工艺，调整产品结构，提高装备水平，做到节能、环保以 促进重钢持续健康发展。第一期工程将新建1780mm 热连轧厂和4100mm 宽厚板厂， 与这两个轧钢厂配套的供排水项目可行性研究设计将对轧钢污水处理工艺进行分析 研究，提出合理利用水资源、循环使用、达到零排放的方案。 轧钢生产过程中消耗水量大，设备、轧材的直接冷却水质被污染，含有氧化铁 皮、油脂和其它杂质，污水经处理后达到轧钢生产要求并循环使用，一直是污水处 理工艺研究的重要课题。本文阐述了重钢新建轧钢厂供排水项目的内容，其中核心 问题就是污水处理、循环使用，分析了传统的轧钢污水处理工艺在实践运行中出现 的缺陷，如水质差、费用高及造成环境污染的原因，提出了1990 年代以后逐渐应用 在轧钢污水处理中的三种净化效果好、占地面积小、投资省的工艺方案，并对三种 处理方案进行技术经济比较，从中选出稀土磁盘分离净化工艺用于重钢新区轧钢的 污水处理，完成可行性研究。 本文重点在估算轧钢污水处理项目各部分资金投入，分析项目的盈利能力、偿 债能力、抗风险能力，并作出效益评估的结论。本文的结论是根据对财务报表的详 细分析以及对内部收益率、净现值、投资利润率和投资回收期等动态、静态财务盈 利性评估指标的计算。 关键词：环保搬迁，供排水，污水处理，财务评估 I ABSTRACT The CSMS （Chongqing Steel Making Corp. ） will be relocated to JiangNa of Chang Shou district of ChongQing. It will acquire advanced equipments and adopt new technologies to reduce energy consumption and be more environmental friendly, which will provide the strength for the growth of the business. In the first stage of the project, two new plants, 1780mm width continuous hot roll and 4100mm width thick plate, will be built. The feasibility studies of the waster water treatment of the two plants suggest a plan that will achieve zero waste water by recycling the process water. Process water is used in steel making to cool equipment and rolled stuffs The oxidized steel scraps, waster grease, etc, will contaminate the process water. Lots of researches had been done on recycling the process water for steel making process. This paper iterated the problems in traditional water treatment technologies ；i.e. deteriorate water quality, high expanses and environment contaminations. Three new technologies developed since 1990s has been compared. They have advantages in quality of treated wat