滑板材料载流摩擦磨损中电弧侵蚀特性研究.pdfVIP

摘要 料和C/C 复合材料之间，C/C 复合材料表现出优异的耐磨性和抗电弧性能，是高 速化铁路滑板材料的选择之一。 关 键 词：滑板材料，摩擦磨损，载流，电弧能量，载流质量，电弧侵蚀 论文类型：应用基础研究 II 摘要 Subject: Study on Arc Erosion Property of the Strip Materials with Electric Current Specialty: Material processing engineering Name: Hu dao chun Supervisor: Prof. Sun le min ABSTRACT The experiments were carried out on the HST-100 tribo-tester with Cu-base powder metallurgy(PM), metal-impregnated carbon strip(MC) and C/C composite under electric current, which simulated working conditions of the pantograph-wire system used in electric railway. The effects of arc discharge and current-carrying quality on tribological properties of three kinds of strip materials were investigated by way of orthogonal experiment. The experimental factors (such as velocity, electric current and load) affecting arc discharge and current-carrying quality were obtained. Used SEM, EDS and XRD, the morphologies of frication surface and vertical section morphologies of frication surface of pin were examined. The arc erosion mechanism of three kinds of strip materials was discussed under different conditions. When an electric current was applied across the sliding interface, the electric arc, which were emitted between the wire and the strip when the contact broke, eroded both the strip and the alloy wire. Experiment data were processed through least square method and orthogonal design, and there is the relationship of power function between wear rate and arc discharge. Regression equation between wear rate and arc discharge was obtained. By comparison the experimental factors (such as velocity, e