基于51单片机的中央空调控制器的设计与制作.doc

毕业设计（论文） 《基于51单片机的中央空调控制器的设计与制作》 基于51单片机的中央空调控制系统 摘 要 由于全球气候的变暖和国内人民生活水平的提高，空调将逐渐成为人们生活中不可缺少的一部分。空调器微电脑控制系统的任务是通过89S5的指令并根据房间的温度、室内热交换器温度、室外热交换器温度、压缩机的状态等来控制空调器的运行过程。具体地说，就是控制压缩机、室外风扇、室内风扇、室内风向电机，并将设定温度和房间实际温度用显示出来。主要功能是根据房间温度和设定温度的差值，并综合考虑其他条件，然后对压缩机和室内外风扇的运行状态进行智能控制。控制系统采用AT89S5单片机收集数据，处理数据来实现对温度控制系统的调控。主要过程如下：利用传感器18B20采集的温度信号将非电量信号转换为电信号，转换后的电信号再进入A/D转换器转换成数字量，传送给单片机进行数据处理，并向外围设备输出控制信号。输给单片机，再由单片机控制显示，并比较采集的温度与设定的温度是否一致，然后驱动空调机的加热或降温循环对空气进行处理，从而实现对室内温度的调节，在整个设计中，涉及到温度检测电路，驱动控制电路，显示电路，键盘电路以及电源的设计等电路。由实时显示被控温度及设定温度，18B20，LCD液晶显 MCU-based air-conditioning control system ABSTRACT As a result of global climate warming and national peoples living standards, air-conditioning will be in peoples lives gradually become an indispensable part. Micro-computer control system for air conditioners by the task instructions and in accordance with 89S51 room temperature, indoor heat exchanger temperature, outdoor temperature heat exchangers, compressors, etc. to control the status of the operation of air conditioners. Specifically, is to control the compressor, outdoor fan, indoor fan, indoor wind motor and the actual set temperature and room temperature liquid crystal display with LCD display. Main function is based on room temperature and temperature difference, and considering other conditions, and then on the indoor and outdoor compressors and fans running for intelligent control. The control system uses a single chip AT89S51 data collection, data processing to achieve the temperature control system of regulation and control. The main process is as follows: use of temperature sensor DS18B20 collecting temperature signal and then the signal is converted to non-power electrical signal, electrical signal and then converted into the A / D converter into a digital transmitted to the single-chip microcomputer for data processing, and output control signal peripherals. Loss single-chip, and then displayed by the single-chip control, and compare the acquisition of the temperature