固化温度对有机硅基低发射率涂层耐腐蚀性能影响.pdfVIP

24 6 Vol.24 No.6 2 0 1 0 12 CHINESE JOURNAL OF MATERIALS RESEARCH December 2 0 1 0 ∗ Æ ( 211100) (EA) Al (3:2) EA/40%Al , EA/40%Al Æ, , , 200 , 2000 h, 200 , , , , , , , , , , TQ324.2, TQ323.5 1005-3093(2010)06-0603-07 Influence of Curing Temperature on Anti-corrosion Properties of Silicone Based Composite Coatings with Low Infrared Emissivity WANG Yajun XU Guoyue∗∗ CHEN Huimin LI Jiufen (College of Material Science and Technology, Nanjing University of Aeronautics Astronautics, Nanjing 210016) * Supported by National Nature Science Foundation of China No Manuscript received April 26, 2010; in revised form July 9, 2010. ** To whom correspondence should be addressed, Tel:(025 E–mail:xuguoy@nuaa.edu.cn ABSTRACT The low infrared emissivity coatings were prepared by using epoxy modified silicone (EA) and Al powder (mass ratio 3:2) as organic adhesive and pigment respectively. The influence of the curing temperature on anti-corrosion properties of the coatings was researched. The chemical composition and the surface structure of EA/40% Al coating were characterized, and the corrosion behavior was investigated by the electrochemical method and anti-corrosion tests. The results show that the coatings curied at 200 exhibit the excellent salt spray resistance, anti ultraviolet ageing performance and hot-wet resistance, which can reach the requirements of engineering applications. KEY WORDS functional material, coatings, curing, epoxy modified silicone, infrared emissivity, anti- corrosion properties 8–