压电谐振式煤矿瓦斯传感器探头设计与研制.pdf

研究类型：应用基础研究 Subject ： Design and fabrication of a Piezoelectric resonant gas sensor probe Specialty ： Material Physics and Chemistry Name ： Guan Renzhong （Signature） Instructor ：Du Huiling Shi Xiang （Signature ） Abstract China is a power country of coal production and consumption. Coal mine production safety issue is very conspicuous, frequent mining accidents, of which gas is an outstanding issue in coal mining. In view of some drawbacks of catalytic combustion type fuel gas, which is widely used, the new methane sensor sensitive probe based on the piezoelectric resonance principle were proposed, used in mine, The probe is consisted of sorbents as a carrier of methane gas, resonator as main body of the probe and piezoelectric ceramic working as provider of exciting power. Researches relating to the sensitive probe on sorbents, the resonator designing and performance analysis has been done. The preparation and characterization of sorbents, the finite element analysis of vibration and sensitive probe design, processing, assembling and performance analysis of sensitive probe were completed. As parallel adsorption materials compared with activated carbon and zeolite, three kinds of complexes with zinc ion as metal framework were prepared by low temperature hydrothermal method using zinc nitrate, zinc chloride and zinc sulfate as raw materials. These complexes were analyzed by XRD, F TIR, TG-DTA and SEM test. The XRD analysis results show that three kinds of complexes crystal with metal framework is pure phase , containing no other impurities. According to