砂土液化大变形弹塑性循环本构模型.pdfVIP

TU435 A 2007 (1978 ) E-mail:wanggang96 @tsinghua.org.cn A cyclic elasto-plastic constitutive model for evaluating large liquefaction-induced deformation of sand 1 2 WANG Gang , ZHANG Jian-min 1. Ertan Hydropower Development Company, Ltd, Chengdu 610021, China; 2. School of Civil Engineering, Tsinghua University, Beijing 100084, China Abstract: The post-liquefaction shear strain of saturated sand subjected to cyclic loading was found to be governed by the changes of the three volumetric strain components, i.e., a component induced by the variation in the mean effective confining stress, a reversible dilatancy component and an irreversible dilatancy component. Then a new cyclic elasto-plastic constitutive model for saturated sand were established, based on the following four important aspects: the above-mentioned new mechanism; a new mathematical description of the two dilatancy components; consistent condition that the three volumetric strain components must meet for various conditions of drainage; the theoretical frame of bounding surface plasticity. The model had been preliminarily confirmed to be effective through various comparisons between the calculated and tested results for Toyoura sa