采用FPGA控制IGBT串联高压调制器研制_陈文光.pdfVIP

36 11 2010 11 30 High Voltage Engineering, Vol. 36, No. 11, November 30, 2010 2827 FPGA IGBT 1, 2 2 1 2 陈文光 , 饶 军, 饶益花, 王明伟 ( 1. 南华大学电气工程学院,衡阳421001; 2. 核工业西南物理研究院, 成都610041) : , IG T , IG T ,RCD , FPGA VHDL IG T , IG T , N I , 12 kV/ 20 A , , : ; ; IG T ; ; ; (FPGA) : T L62-9. 1;TM 834 : A : 1003-6520(2010) 11-2827-06 Development of the IGBT Series High-voltage Modulator Using FPGA Controlled 1, 2 2 1 2 CHEN Wen-guang , RAO Jun , RAO Y-i hua , WANG Ming-wei ( 1. School of Electrical Engineering, University of South China, H engyang 421001, China; 2. Southwestern Institute of Physics, Chengdu 610041, China) A stract: High-voltage modulator plays an important role in pulsed power technology, and the development trend of the solid-state modulator is IG T in series connection. ased on new RCD dynamic voltage-sharing circuits, field- programmable gate array (FPGA) device and hardw are description language were used to design the drive signal dis- tribution circuit, so as to realize each unit precision delay control in the process of sw itch-on and sw itch-off and to realize the logic synthesized protection. Meanwhile,the protection function of lack of DC supply, over-current and o- ver-voltage are combined and completed with the drive circuit. A modulator with the rated blocking voltage 12 kV / 20 A is achieved for N I deceleration grid pow er supply on HL-2A tokomak. The experimental results show that the method is effective in active dynamic voltage-sharing, and it can provide a good reference and basis for engineering applications in higher voltage and current level of solid-state modulator. Key words: high-volta