百叶窗翅片传热特性的数值模拟.pdfVIP

第28 卷第 1 期 建 筑 热 能通 风 空 调 Vol.28 No.1 2009 年2 月 Building Energy Environment Feb. 2009.6~9 文章编号：1003-0344（2009）01-006-4 百叶窗翅片传热特性的数值模拟 寇磊 廖胜明 刘玉涵 中南大学能源科学与工程学院 摘 要：为研究百叶窗翅片空气侧的传热和流动特性，建立了换热器的三维模型并进行数值模拟，通过计算得出 传热与阻力特性与实验关联式吻合较好；同时对不同百叶窗倾角和百叶窗间距的模型进行了计算，比较发现倾角 为27°的百叶窗翅片的传热最好；翅片间距不同，对应的传热最好的百叶窗间距不同；阻力随着百叶窗倾角和百叶 窗间距的增大而增大。计算结果为换热器优化设计提供了依据。 库 关键词：百叶窗翅片三维数值模拟传热特性 例 Numerical Simulation for Heat Transfer Performance of Louvered Fin KO 案 U Lei, LIAO Sheng-ming, LIU Yu-han School of Energy Science and Engineering, Central South University E n A c Abst ract : A three dimensional numerical model was established for heat exchanger with louvered fin, and numerical . simulation in air side heat transfer and fluid flow characteristics was conducted. It is found that the heat transfer and C g friction performance are in good agreement with the correlations in the literatures. The heat transfer performance of r different louver angles and louver pitches was numerically studied. It is resulted that the heat transfer performance is the best for the louver angle at 27°, 模 o and with the different pin pitch, the best louver pitch is different, and the pressure drop . increases with the increasing of the louver angle and louver pitch. The model developed in this paper co