大功率LED照明装置微热管散热方案分析.pdfVIP

47, 052201 (2010) ©2010 中国激光杂志社 doi: 10.3788/lop47.052201 大功率LED照明装置微热管散热方案分析 李 勇 李鹏芳 曾志新 (华南理工大学机械与汽车工程学院，广东 广州 510640) 摘要 设计了一种新型的带有百叶窗的平板式大功率发光二极管(LED)照明装置。该装置采用高导热系数的铝基板 作为多颗大功率 LED 的散热电路板，用0.4 mm 的铝片作为散热翅片，结合沟槽式微热管构成集发光与散热一体化 的输入功率为21 W 的照明模组，该模组可根据照明亮度要求重构成不同功率的照明装置。对功率为 144 W 的照明 装置进行了理论分析与实验研究。根据理论计算，每个照明模组的发热量约为 18 W，每个照明模组的传热量约为 47 W ；模拟结果表明，在环境温度为30 ℃，自然对流换热系数为 10 W/(m2 ·K) 时，LED 芯片最高结温 T ＝75 ℃， a 而实验测得 Ta ＝75.7 ℃。 关键词 LED 照明装置；数值模拟；散热技术；微热管 中图分类号 TN318 OCIS 220.2945 230.3670 文献标识码 A Mirco Heat Pipe Cooling Solution for High Power LED Illuminator Li Yong Li Pengfang Zeng Zhixin (School of Mechanical Automotive Engineering, South China University of Technology, Guangzhou, Guangdong 510640, China) Abstract A new plate-type high power LED illuminator with louvers is designed. Aluminum plate with high thermal conductivity is applied as radiated circuit plate for high power LEDs, and aluminum stack with 0.4 mm thickness as radiated fins, which make illuminator module with input power 21 W combining with micro grooved heat pipe. The illuminator module is integrated with lightening and radiating. According to lumination requirements, module groups can be reconstructed into illuminators with different input power. Theoretical analysis and experimental research were conducted to a 144 W illuminator. Calculated results indicate the calorific value of one module is 18 W and the heat transfer value is 47 W. The simulated results indicat