参考：基于单片机热量高精度计量.doc

结题报告 供暖系统热量的高精度计量技术 及其应用系统设计 负责人： 单位：  摘 要 我国地域广阔，人口众多，房屋建筑规模巨大建筑物的保温隔热能很差，供暖系统热效率低，单位住宅建筑面积采暖能耗为相同气候条件下发达国家的3倍国外的热计量经验表明按照热量收费的制度是促使用户自觉节能的最有效手段示参数不够齐全功耗过大积分计算器抗干扰能力差热量表数据输出远传的接口方法混乱 ABSTRACT 0ur country is so large and there are so many people, houses built to live are on a large scale. They can not keep heat from air so as the efficiency of the system of supplying is low.Heat consumption of per square meter is three times as that of developed country. Experience of foreign country indicates that most effective means to move users to save heat energy is to install calorimeters and collect money according to the heat used by users. Now calorimeters have the following shortcomings：parameters displayed are less than what should be displayed； consumptions of energy exceed what are expected; calorimeters are unable to avoid disturbance ；measurement results of temperature and heat are much different from what they should be；means of transmission of information of calorimeter is not coincident and so on.。In the paper, select matching temperature sensors which can make the error of measurement of temperature less than 0.1 centigrade and measurement circuits which are supplied with power which can supply invariable voltage and current; To improve measurement method of flow, use a sensor which are sensitive to magnet to measure flow,measurement results have nothing to do with the magnetic field variation speed.；choose chip MSP430 which is low power consumption after compared with chip P87LPC764, of heat energy is controlled by time, which is done once per minute。After full verification of testing algorithm and a lot of experiment ,develop a prototype in which all parameters displayed have been improved obviously。 Key words： ; k coefficient reparable method; flow measure;heat energy compute; MSP430 single-chip 目 录 摘 要 I ABSTRACT II 目 录 III 第一章 绪论 1 1.1 该项目开发的必要性与应用前景及当前现状 1 1.2 该项目开发的关键技术 2 1.