毕业设计05398.docVIP

毕业设计（论文）说明书 办学单位： 专 业： 学生姓名： 学 号： 设计(论文)题目：遥控器外壳产品开发设计及模具设计 起 迄 日 期:2011年11月30日至2012年4月15日设计(论文)地点: 机械与电子工程学院 指 导 教 师: 教 研 室 主 任： 摘要 塑料工业是当今世界上增长最快的工业门类之一， 而注塑模具是其中发展较快的种类，因此，研究注塑模具对了解塑料产品的生产过程和提高产品质量有很大意义。本设计采用了?PRO/E?软件对相机外壳和模具进行三维造型，通过模具的模拟设计，在传统的模具设计基础上，充分应用模拟工具，提高模具设计质量，缩短模具设计周期、提高生产效率。本设计介绍了注射成型的基本原理，特别是单分型面注射模具的结构与工作原理，对注塑产品提出了基本的设计原则；详细介绍了冷流道注射模具浇注系统、温度调节系统和顶出系统的设计过程，并对模具强度要求做了说明；以及详细的分析了注塑模具在注塑成型之前的准备和计算。 通过本设计，可以对注塑模具有一个初步的认识，注意到设计中的某些细节 问题，了解模具结构及工作原理。 abstract plastic industry is in the world grows now one of quickest industry classes, but casts the mold is development quick type, therefore, the research casts the mold to understand the plastic product the production process and improves the product quality to have the very big significance. This design has used Pro/E software DVD Remote Control outer covering and dies for 3D modeling, Through mold simulation design, In the traditional mold design on the basic of the full application of simulation tools, Improves the mold design quality, Reduction mold design cycle, Enhances the production efficiency. This design introduced the injection takes shape the basic principle, specially single is divided the profile to inject the mold the structure and the principle of work, to cast the product to propose the basic principle of design? Introduced in detail the cold flow channel injection evil spirit mold pours the system, the temperature control system and goes against the system the design process, and has given the explanation to the mold intensity request? As well as the detailed analysis injection mold before injection molding formation preparation and the computation. Through this design, may to cast the mold to have a preliminary understanding, notes in the design certain detail question, understands the mold structure an