高分子材料与工程专业毕业论文--NRLLDPE共混体系性能的研究.docVIP

NR/LLDPE共混物性能的研究 摘要：本文所选用天然橡胶（NR）质量为100g，规格为烟片胶，旨在通过设定适宜的共混温度与硫化温度，将线性低密度聚乙烯（LLDPE）通过机械共混来制备NR/LLDPE复合材料，重点考察LLDPE的含量、配方设计（主要是补强体系与硫化体系）、对复合材料结构和性能的影响，而后通过各种性能测试（主要是红外光谱、扫描电镜、XRD）对制品进行表征。实现了LLDPE在NR中的均匀分散，最终获得综合性能优异的NR/LLDPE复合材料，并由各种表征测试结果从微观结构上对体系所获得的各种性能进行解释。 关键词：线性低密度聚乙烯（LLDPE），天然橡胶（NR），共混，性能，表征 Properties of Filled NR/LLDPE Blends Abstract：The weight of natural rubber (NR) of this paper is 100g, the size is piece rubber, and the target is to attain the exllent properties of the NR/LLDPE blend by setting the appropriate temperature and curing temperature. Put the linear low density polyethylene (LLDPE) prepared by mechanical mixing to the natural ruber,the emphasis is the content of LLDPE,formulation(mainly reinforcing system and curing system), the composite material structure and properties, and then through a variety of performance tests(mainly IR, SEM, XRD) of products were characterized. Achieved in the LLDPE dispersed in NR, ultimately, overall performance of NR / LLDPE composites, characterized by a variety of test results from the micro-structure of the system obtained by a variety of performance interpretation.. Keywords：Linear low density Polyethylene(LLDPE), Natural rubber(NR), Blend, Performance, Characterization …………………………................................................................................1 1.2.1 LLDPE简介..................................................................................................................1 1.2.2 NR简介.........................................................................................................................4 1.3 课题方案拟定及研究意义............................................................................................6 2 实验部分...........................................................................................................................8 2.1 实验原料及配方..............................................................................................................8 2.1.1 实验原料......................