GL-14锅炉燃烧调整调试方案.docVIP

GL-14_锅炉燃烧调整调试方案 Code File No. TEQ-GL-17 Turkish SILOPI 1×135MW Power Plant Boiler Combustion Adjustment Commissioning Measures Edited by： Date: Checked by: Date: Approved by: Date: Countersign: Construction Party: Date: General Contractor: Date: Owner: Date: Hebei No.2 Electric Power Construction Company Commissioning Institute 15 March, 2008 目 录1、编制目的2、编制依据3、调试质量目标4、锅炉概况及主要设计技术规范5、试验内容6、试验应具备的条件7、试验方法8、职责分工9、质量控制点10、安全注意事项 1、编制目的 Editing Purpose 1.1对新装锅炉，进行适当的燃烧初调，以保证试运期间机组安全、稳定运行。要求锅炉燃烧工况稳定，燃烧良好，不冒黑烟，无结焦，不造成尾部烟道的严重污染和腐蚀，能带满负荷连续 72＋24小时运行。并为试生产积累一定的运行经验，为以后的锅炉性能试验提供参考数据。Proper combustion initial adjustment is necessary for the newly erected boiler to ensure safe and stable condition during trial operation. The requirements are stable combustion condition, good combustion, no black smoke, no coking, no heavy pollution or corrosion to the second pass, able to run 72+24 hours continuously with full load, and have some experience for trial production and provide reference data for boiler performance test. 1.2为了指导锅炉燃烧调整试验工作，保证试验安全正常进行，制定本措施。The measures are made for guiding boiler combustion adjustment testing work, and ensuring the safe testing. 2、编制依据 Reference 2.1《火力发电厂基本建设工程启动及竣工验收规程》（1996年版）Thermal Power Plant Infrastructure Start and Completion Inspection Regulations 1996 Edition 2.2《电力建设施工及验收技术规范》锅炉机组篇（1992年版）Power Construction and Inspection Specification Boiler Units Chapter 1996 Edition 2.3《火电工程调整试运质量检验及评定标准》（1996年版）Thermal Power Plant Commissioning Quality Inspection and Assessment Criteria 1996 Edition 2.4《火电工程启动调试工作规定》（1996年版）Thermal Power Plant Start and Commissioning Regulation 1996 Edition 2.5《燃煤锅炉燃烧调整试验方法》 Coal Fired Boiler Combustion Adjustment Test Method 2.6《电力工业锅炉监察规程》2.7厂家和设计院有关资料Manufacturer and design institute related document 2.2中南电力设计院图纸和设计说明书 2.3设备制造厂图纸和说明书 2.4质量检验表 3、调试质量目标 Commissioning Quality Target 通过对锅炉进行燃烧初调整，使锅炉燃烧稳定，