表型磁器[型号KM].docVIP

表型磁器[型号KMD] CATALOG 产品目录 KMD-20C KMD - 20C条 Compact but improved demagnetizing performance!紧凑，但改善消磁性能！ [Application] [应用] These demagnetizers produce an alternating magnetic field on the surface by use of an AC power source through which workpieces are passed to remove the magnetism remaining on their surface.除去这些退磁在其表面产生磁其余一交变磁场对表面使用交流电源，通过传递的工件。 [Features] [特点] Thick workpieces can be demagnetized effectively by passing the front and rear side over the demagnetizer.厚的工件，可有效地消磁通过传递正面和背面的磁器以上。 These demagnetizers are very powerful and can demagnetize steel materials such as high speed steel, bearing steel, nickel-chrome steel, spring steel, die steel, etc. which are difficult to demagnetize by standard demagnetizers (since these steels have the property similar to magnetic steel which retains residual magnetism and is hard to remove).这些退磁非常强大，可以消磁钢材料退磁，如高速钢，轴承钢，镍铬钢，弹簧钢，模具钢等，这是很难用标准消磁（因为这些钢材具备的使用性能类似磁钢，保留剩余磁性，是难以消除）。 These demagnetizers have good heat radiation and can withstand continuous power application.这些退磁具有良好的热辐射，并能承受连续功率的应用。 磁器型逆变器控制[型号KMD - F]中 CATALOG 产品目录 KMD-F20 KMD - F20的 EDH-20A 字节EDH - 20A条 Less power and enhanced demagnetizing performance!更省电和增强消磁性能！ [Application] [应用] This model is designed to generate an alternating magnetic field on the surface by an AC power source, where workpieces are passed to eliminate the magnetism remaining on the surface of workpieces.这种模式是专门来产生工件表面上的交变磁场对表面由交流电源，在那里传递到工件剩余磁性消除。 [Features] [特点] Demagnetization is carried out by varying (sweeping) a frequency lower than commercial frequencies from a lower point to a higher point.退磁进行通过改变（扫）的频率较低的低一点，比商业频率从一个更高点。 This model has improved the demagnetizing performance without increasing the amount of electricity to use.该模型提高了电力使用消磁性能不增加的数额。 The demagnetizing part is of the same dimensions as the conventional table type demagnetizer (KMD-C).该部分是消磁- C）的尺寸相同的常规表类型磁器（KMD。 With the same output current (AC effective value) as conventional models, the residu