闭锁式液力偶合器设计（离心式摩擦离合器）.doc

摘 要 液力偶合器的实质是离心泵与涡轮机的组合，主要由输入轴、输出轴、泵轮、涡轮、外壳、辅室及安全保护装置等构成。目前对液力合器的设计有三种——研发类的全新型设计、相似设计和选型设计。工程中运用最多的是选型设计。本文试图在结合行业中液力合器的设计惯例，结合工作要求，进行选型设计和相似设计，并做重要部分的结构设计。对输出轴孔和输入轴孔进行结构设计与校核，包括轴孔的强度校核和轴孔上的配合螺栓组强度校核。本文也对输出轴孔的轴承进行了选择和校核。确定了泵轮和涡轮的厚度及合金材料成分。 液力合器选型设计相似设计结构设计 Hydraulic coupling, in essence, is centrifugal pump and turbine combination. Enter from the main shaft, the output shaft, pumping round, turbine, shell, auxiliary rooms and pose a security device. Coupled with the current hydraulic design of the three-research and development of new types of design, similar to the design and type design. Engineering is the largest use of type design. This paper attempts to combine industry in the hydraulic coupling in the design practice, the combination of work requirements, selection and design of similar design, and to do important part of the structural design. The output shaft hole and input shaft hole for structural design and verification, including the shaft hole and check the strength of the shaft with bolt holes on the group strength checking. From all kinds of hydraulic coupler introduced the structure, we can see that, all kinds of hydraulic coupler are to be in the rotation speed difference in power transmission, speed job torque and power are loss, this is hydraulic coupler inner defects. The design of the closure type hydraulic coupler can effectively to make up for the defect. Atresia type hydraulic coupler is limited in rectangular hydraulic coupler on centrifugal friction of the clutch.In this paper, check the option of the output shaft hole’s bearings. Determine the pump and turbine wheel of alloy material composition and thickness. Key words: hydraulic coupler; Selection design; similar design, structure design 前 言 在国际竞争日益加大的今天，我国企业的经营环境和经营理念等发生了极大地变化，企业争相研究新技术并尽力把新技术转化为生产力，这使无形资产在绝对数和相对数上都有快速、大量的增长。远对液力合器行业的发展具有深的影响贸易保护主义的，液力合器行业中技术含量低的人力密集型企业，缺乏品牌的出口导向型企业面临发展危机，而注重培养品牌和技术创新能力较强的企业将占得先机，液力合器行业企业如何面对新的经济环境和政策环境，制定适合当前形势和自身特点的发展