Fram relay.pptVIP

LAN Extension into a WAN Establishing a WAN Connection with Frame Relay Outline Frame Relay Overview CSU/DSU（信道服务单元和数据服务单元） Frame-Relay substitute X.25 Frame Relay Terminology Local Access Loop CIR 中心路由器如何与分支路由器建立连接？ vc： pvc and svc ISP establish How to differentiate PVCs？ DLCI number (ISP assign): Only local availability, 0~1024. Preserving：0~15 and 1008~1023 (16~1007). Who maintenance PVC connect status？ Selecting a Frame Relay Topology 路由器怎样通过帧中继PVC来传输数据呢？ Stages of Inverse ARP and LMI Operation Stages of Inverse ARP and LMI Operation (Cont.) Configuring a Static Frame Relay Map Resolving NBMA Reachability Issues Resolving NBMA Reachability Issues Configuring Frame Relay Point-to-Point Subinterfaces Configuring Frame Relay Multipoint Subinterfaces Verifying Frame Relay Operation Verifying Frame Relay Operation (Cont.) Verifying Frame Relay Operation (Cont.) Verifying Frame Relay Operation (Cont.) How Service Providers Map Frame Relay DLCIs: Service Provider View Service Provider Frame Relay-to-ATM Internetworking Lesson Aim Enter lesson aim here. Purpose: This figure is a transition discussion to illustrate the need for subinterfaces. Now that students are familiar with the concept and configuring of Frame Relay, they are ready to consider the issues and solutions related to broadcast updates in an NBMA Frame Relay network. Emphasize: Compare the different topologies described. Explain that by default, interfaces that support Frame Relay are multipoint connection types. This type of connection is not a problem when only one PVC is supported by a single interface; but it is a problem when multiple PVCs are supported by a single interface. In this situation, broadcast routing updates received by the central router cannot be broadcast to the other remote sites. Broadcast routing updates are issued by distance vector protocols. Link-state and hybrid protocols use multicast and unicast addresses. Layer 4 of 4 Purpose: This figure describes the Inverse ARP an