机电技术专业英语 教学课件 作者 徐起贺 张庆良pata b lesson Eighteen.pptVIP

* 机电技术专业英语 Lesson Eighteen Text Generally, AC servo motors have no parts that wear off or that must be replaced periodically, unlike DC servo motors, which have brushes that must be replaced periodically. However, you should perform periodic maintenance for servo motors so as to keep their initial performance as long as possible and to prevent breakdowns. AC servo motors have precision detectors .Their incorrect use or damage caused during transportation or assembling can result in breakdowns or accidents .We recommend that you inspect the servo motors periodically according to the descriptions given below. AC Servo Motor Maintenance Lesson Eighteen Receiving and Keeping AC Servo Motors When you receive an AC servo motor, make sure that (1) The motor is exactly the one you ordered, in terms of model, shaft, and detector specifications. (2) No damage has been caused on the motor. (3) The shaft can be rotated by the hand normally. (4) The brake works normally. (5) There is no loose bolt or play. Because FANUC inspects servo motors strictly before shipment, you do not, in principle, have to inspect them when you receive them.However,youshould check the specifications (wiring ,current ,and voltage) of the motor and detector carefully ,as required . The servo motors should be kept indoors as a rule ,the storage temperature range is -20℃ to +60℃. Do not place or install AC servo motors in the place where  Lesson Eighteen (1) It is extremely humid and dew is prone to form. (2) There is a steep change in temperature. (3) There is constant vibration ,which may cause damage to the shaft bearings. (4) There is lots of dust and trash. Daily Inspection of AC Servo Motors Before starting operation, or periodically (once a week or month ) , you should inspect the AC servo motors in terms of the following  (1) Vibration and noise .Check the motor for abnormal vibration ( by the hand ) and n