竹底板执行标准(中、英文).docVIP

竹木复合集装箱底板标准 Q/GL 0001-2006 本标准主要起草人：张齐生院士（国家工程院院士、竹木复合集装箱地板的发明人） 毕培忠总工 Primary draftsman of the standard: Academician Zhang Qisheng (National Engineering Academician, inventer of bamboo wood composite container flooring) 本标准起草组织人：吴立洲 Organizer of drafting the standard: Wu Lizhou 标准实施时间：2006年1月。 Implement time of the standard: Jan. 2006 竹木复合集装箱底板 Bamboo wood composite container flooring 范围 Scope of application 本标准规定了竹木复合集装箱底板的定义、技术要求、试验方法、检验规则以及标志、包装、运输和贮运的要求。 This standard specifies bamboo wood composite container flooring’s definition, technology requirement, test method, check regulation mark, requirement of package, transport and storage. 本标准适用于3.1中所定义的竹木复合集装箱底板。 The standard is applicable for the bamboo wood composite container flooring defined in the section 3.1. 引用标准 Quoted criterion 下列标准所包含的条文，通过在本标准中引用而构成为本标准的条文。本标准出版时，所示版本均为有效。所有标准都会被修订，使用本标准的各方应探讨使用下列标准最新版本的可能性。 The following items constitute the standard items by quoted. All notifying version is valid as soon as the standard published. As all criterions may be modified, all parties using these criterions should discuss possibility for using the latest versions of the following criterions. GB/T17657-1999 人造板及饰面人造板理化性能及试验方法 Physicochemical performance and test method of artificial board artificial finishing board. GB/9846.1~9846.12-1988 普通胶合板 GB/9846.1~9846.12-1988 Common veneer . ISO1496-1 1990 (E) Seriesl freight containers-Specification and testing-part1：General cargo containers fir general purposes. BS EN310：1993 Wood-based panels-Determination of modulus of elasticity in bending and of bending strength. BS6566：Part4：1985 Plywood Part4.Specification for tolerances on the dimensions of plywood panels. BS6566：Part6：1985 Plywood Part6. Specification for timits of defects for the classification of plywood by appearance. BS6566：Part8：1985 Plywood Part8. Specification for bond performance of veneer plywood. B1023：1979 Specification for Synthetic resin adhesives (phenolic and aminoplastic) for