CCD航空相机论文：CCD航空相机仿真模拟技术研究.docVIP

CCD航空相机论文：CCD航空相机仿真模拟技术研究 【中文摘要】航空相机是为适应不断发展的侦查任务而产生的一种先进的机载设备,对其参数测量一次要花销大量精力财力,因此需要一种能模拟飞行环境检测相机性能的系统,降低测试成本,本课题便是基于此种设想而产生。分辨率是判断航空相机性能好坏的主要参数,其中对动态分辨率的测试更是首当其冲且较难测量的指标。本文首先介绍了航空相机分辨率测试基础理论根据,共分静态动态两种,并着重说明了动态检测方法思想；其次详细说明了系统的总体结构设计其中包含了特殊分辨率板与动态图形发生装置以及机械结构的设计；而后论述了两个关键技术单元即动态图形驱动装置以及光学系统的构成和详细设计过程。最后介绍了综合控制系统的总体设计方案,并具体阐述了航空相机操控与仿真模块的系统设计。 【英文摘要】Aviation camera is of a kind of advanced airborne equipment which to adapt to development of investigation task arising, the parameter measurement of it will spend much energy resources, therefore we need a system which can simulate flying environment and detects the camera performance, reduce the cost. The subject is based on this idea and produced.Resolution is the main parameters for judging aviation camera performance, among which the test of dynamic resolution is more difficult to measure. This paper first introduced the aviation basic theory according to the camera resolution test, contains two kinds of theory:static and dynamic resolution test, and emphatically explained that dynamic detection method thinking. Secondly introduced the system of the whole structure design in detailed, which includes a special resolution plate and dynamically graphic generator and mechanical-structural design. Then discussed the key technologies of unit:dynamically graphic device drivers and optical system structure and detailed design process. At last, the paper introduces the comprehensive control system of the overall design scheme, and gives a concrete aviation camera manipulation and simulation modules of the system design. 【关键词】CCD航空相机 平行光管 分辨率 PMAC卡 直线电机 429总线 【英文关键词】CCD aviation camera parallel light tube resolution PMAC card linear motor 429 bus 【目录】CCD航空相机仿真模拟技术研究 摘要 4-5 ABSTRACT 5 目录 6-7 第一章 绪论 7-10 1.1 研究的目的与意义 7 1.2 国内外发展现状 7-8 1.3 本文研究的主要内容 8 1.4 主要技术指标 8-10 第二章 CCD航空相机仿真模拟系统的工作原理 10-13 2.1 CCD航空相机的工作原理 10 2.2 光学系统衍射极限分辨率的判据 10-11 2.3 相机的动态分辨率测试原理 11-13 第三章 总体结构设计 13-26 3.1 总体设计方案 13-15 3.