雷达操作手册827.doc

操作说明书 FAR-28x7系列 FAR-21x7（-BB）系列 海华公司内部资料目 录 1. RADAR OPERATION雷达操作 1 1.1 Turning on the Power打开电源 1 1.2 Transmitter ON发射 1 1.3 Control Uuit控制单元 1 1.4 Main Menu主菜单 1 1.5 Operation Using the On-Screen Boxes屏幕上的操作 2 1.6 CURSOR Menu光标菜单 3 1.7 Monitor Brilliance 屏幕亮度 3 1.8 Choosing the Display Mode选择显示模式 3 1.9 ON-Screen Boxes and Markers屏幕上的方框和标记 4 1.10 Tuning the Receiver调谐接收机 4 1.10.1 Choosing the tuning method选择调谐方式 4 1.10.2 Initializing tuning初始化调谐 4 1.10.3 Automatic tuning自动调谐 5 1.10.4 Manual tuning手动调谐 5 1.11 Aligning Heading with Gyrocompass调整船首向 5 1.12 Presentation Modes 显示模式 5 1.12.1 Choose presentation mode选择显示模式 6 1.12.2 Description of presentation modes 显示模式介绍 6 1.13 Entering Own Ship’s Speed输入本船速度 6 1.13.1 Automatic speed input by log or GPS navigator从计程仪或GPS自动输入速度 6 1.13.2 Manual speed input手动输入速度 7 1.14 Choosing the Range Scale选择量程 7 1.15 Choosing the Pulselength选择脉冲长度 8 1.15.1 Choosing pulselength 选择脉冲长度 8 1.15.2 Changing pulselength 改变脉冲长度 8 1.16 Adjusting the Sensitivity 调节灵敏度 8 1.17 Suppressing Sea Clutter 抑制海浪干扰 9 1.17.1 Choosing method of adjustment 选择调节方法 9 1.17.2 Automatic adjustment by the A/C SEA control调节海浪抑制 9 1.18 Suppressing Rain Clutter 抑制雨水干扰 9 1.18.2 Adjusting A/C RAIN调节雨水干扰 9 1.19 Interference Rejector 干扰抑制器 10 1.20 Measuring the Range 测量量程 11 1.20.1 Turning range rings on/off 开/关范围圈 11 1.20.2 Measuring range by variable range marker(VRM)利用可变距离刻度测量范围 12 1.20.3 Choosing VRM unit of measurement(B,C and W types)选择VRM度量刻度 12 1.21 Measuring the Bearing测量方位 13 1.21.1 Measuring the bearing测量方位 13 1.21.2 Choosing true or relative bearing选择真方位或相对方位 14 1.22 Collision Assessment by Offset EBL利用电子方位线估算碰撞 14 1.22.1 How to assess risk of collision by the offset EBL利用EBL估算碰撞危险 14 1.23 Measuring Range and Bearing Between Two Targets测量两个目标距离和方位键盘 15 1.24 Setting a Target Alarm设置目标报警 15 1.24.1 How to set a target alarm zone怎样设置目标警报区域 15 1.24.2 Acknowledging the target alarm确认目标报警 16 1.24.3 Deactivating a target alarm解除目标报警 16 1.24.4 Target alarm at