SIAM能源工程管线规范.docVIP

Prepared By 制备 Initial: 初始： Consultant: 顾问： Date: 日期： SIAM ENERGY PROJECT SIAM 能源工程 WWO Burton Checked By 审核 STA Burton Approved By 批准 ABU Burton Certified By Owner 允许 Rev No.: 版本号 Date: 日期 Revised By 修正：: Approved By: 批准： Description ： 描述 A 11/12/08 Issued for ITB 发行 SIAM ENERGY COMPANY LIMITED SIAM 能源有限公司 SPECIFICATION OF LINE PIPE 管线标准 SP-D-0803.02-1001-013 REV A Total 23 pages Burton Technical Solution Co.,Ltd. Area Code: 1001 BTSC Job No.: 001/2008 PO No.: GJP 08/022 Project Code No.: 0803.02 TABLE OF CONTENT 目录 SECTION PAGE 内容 页码 1. SCOPE3 范围 2. PROCESS OF MANUFACTURE AND MATERIAL6 生产工艺与材料 3. MATERIAL REQUIREMENTS11 材料要求 4. DIAMENTIONS, WEIGHTS, LENGTHS, DEFECTS AND END FINISHES16 外径，重量，长度，缺陷与管端处理 5. INSPECTION AND TESTING18 检测与试验 6. MARKING21 喷标 7. DOCUMENTS23 文件 8. HANDLING, PACKAGING, TRANSPORT AND DELIVERY25 操作，包装，运输和交付 - appendix b27 附件B - appendix n28 附件N ATTACHEMENT 135 附录1 FIGURE 1 AND FIGURE 2 TEST WELDS 图表1与图表2 焊缝检测 1.0 SCOPE 范围 This Specification covers the manufacture, inspection testing and delivery of line pipe. Pipe supplied under this Specification shall meet the requirements of the API Specification for Line Pipe, Spec 5L, Forty Third Edition, (October 2004) except where this Specification provides more stringent requirements. In this specification should imply the application of the requirements as stated in the same sections of API 5L, specification. The numbering of paragraphs in this Specification corresponds to API 5L sections and paragraph numbers. Additional clauses are numbered sequentially as if part of the relevant sections in API 5L. 此标准包含管线钢管的制造、检测和发运。此标准下供应的钢管除了规定的更加严格的要求外，应该满足API 5L标准对于管线钢管 5L，43版本的要求（2004年10月）。此标准应该采用API 5L 标准中同样章节中描述的要求。标准中编号的段落对应API 5L的章节和段落号。附加的条款如果是API 5L标准中相关的