高温后大理岩力学性质及其破坏规律研究_陈国飞.pdfVIP

31 8 Vol.31 No.8 2014 8 Aug. 2014 ENGINEERING MECHANICS 189 1000-4750(2014)08-0189-08 ( 221008) 800 - 200 200 400 ~800 - TU452 A doi: 10.6052/j.issn.1000-4750.2013.05.0485 STUDY ON FAILURE MECHANICAL BEHAVIOR OF MARBLE AFTER HIGH TEMPERATURE CHEN Guo-fei , YANG Sheng-qi (State Key Laboratory for Geomechanics and Deep Underground Engineering, China University of Mining Technology, Xuzhou, Jiangsu 221008, China) Abstract: Laboratory tests were made to study the mechanical properties of marble from room temperature of 800 . The changes of peak intensity, peak strainthe modulus of elasticity, the modulus of the deformation and complete stress-stain curve of marble after high temperature were analyzed in detail. An acoustic emission instrument and a scanning electron tester were used at the same time. The failure law of marble after high temperature was studied. The results showed that the length and diameter of a marble specimen after high temperature increase, the mass and density decrease, but change little at 200 ; The mechanical properties of marble change little when the temperature keeps to 200 ; The peak intensity, the modulus of elasticity and deformation modulus of marble decrease and peak strain becomes large as the temperature increases when the temperature is between 400 to 800 , the changes became more obvious as the temperature increase; The ringing count of the acoustic emission has a good corresponding relationship with a stress curve, which fully reflects the rupture evolution law of marble in different stages; Temp