JDSU传输理论.pdfVIP

10X10HD MSA Introduction David Lewis 1st March, 2011 Agenda  Introductions – record of participants  Objectives for the 10X10HD MSA – presentation and discussion. Straw poll to gauge consensus on objectives.  CXP2 presentation.  New proposed MSA agreement – overview.  Wrap up – action items © 2011 JDS Uniphase Corporation | JDSU CONFIDENTIAL AND PROPRIETARY INFORMATION 2 Objectives 10X10HD Draft Objectives 1. Optical interface compliant with 10X10-2km and/or 10X10- 10km optical specifications 2. Module footprint and faceplate density to support a standard 1U x 19” card with 1,000 Gb/s aggregate throughput 3. Electrical interface to comply with CPPI (IEEE802.3ba Annex 86A) 4. Electrical connector and cage to be based on existing designs, e.g., CXP or extended QSFP+ 5. Module power dissipation of 6-8 W in support of 60 W per line card 6. Module operating case temperature at least from 0 to 70 °C 7. Module-to-cage latch mechanism similar to XFP © 2011 JDS Uniphase Corporation | JDSU CONFIDENTIAL AND PROPRIETARY INFORMATION 4 Discussion of Objectives - 1 1. Optical interface compliant with 10X10-2km and/or 10X10- 10km optical specifications 2. Module footprint and faceplate density to support a standard 1U x 19” card with 1,000 Gb/s aggregate throughput Notes: © 2011 JDS Uniphase Corporation | JDSU CONFIDENTIAL AND PROPRIETARY INFORMATION 5 Discussion of Objectives - continued 3. Electrical interface to comply with CPPI (IEEE802.3ba Annex 86A) 4. Electrical connector and cage to be based on existing designs, e.g., CXP or extended QSFP+ Notes: © 2011 JDS Uniphase Corporation | JDSU CONFIDENTIAL AND PROPRIETAR