表面规则微凹腔半径对活塞环润滑性能的影响.pdfVIP

do:i 10. 3969/j. issn. 1671- 7775. 2010. 06. 001 符永宏, 季 伟, 张华伟, 纪敬虎, 华希俊 (, 212013) : 以激光微造型活塞环表面为研究对象,建立表面具 规则微观抛物面凹腔结构的数学模型. 利用变异多重网格法对该模型进行数值求解, 得到活塞环 - 缸套间最小油膜厚度和无量纲平均摩 擦力变化曲线,分析微凹腔半径对活塞环润滑性能的影响.分析结果表明: 最小油膜厚度随微凹腔 半径增大而明显变厚,无量纲平均摩擦力随微凹腔半径增大而减小,但在进排气冲程中, 无量纲平 均摩擦力的减小不明显; 在压缩做功冲程中, 无量纲平均摩擦力的减小显著, 当凹腔半径 r 从 p 20 m变化到 70 m时,无量纲平均摩擦力最多减小了 687% . : 活塞环; 激光微造型; 微凹腔半径; 变异多重网格法; 润滑性能 : TH117 : A : 1671- 7775( 2010) 06- 0621- 04 Influence of surface regular m icropore radius on lubrication perform ance of piston ring Fu Yonghong, J i Wei, Zhang H uaw ei, J i J inghu, H uaX ij un ( School ofM echanicalEngineering, Jiangsu University, Zhenjiang, Jiangsu 212013, China) Abs tract: To study the surfaceof laserm icrotexturing piston ring, amathem aticalmodelwas established for the piston ringw ith regularm icrostructure in theparabolic form. Through the numericalsolution of the modelby modifiedmultigridmethod, them inmi um film thickness and thegraph of dmi ensionless average friction force bewt een piston ring and cylinder liner were obtained, and the influence laws of m icropore radius on the lubrication performance of piston ringwere also analyzed. The results show that there is an apparent increase of film thickness and decreaseof dmi ensionless average frictionw ith the increase ofm i cropore radius. However, in the intake and exhaust strokes, the dmi ensionless average friction decreases slightly; in theother two strokes, itdecreases substantially. As pore radiusrp increases from 20 m to70 m, the dmi ensionless average friction decreases by 687% atmos.t Key w ord s: piston ring; laserm icrotexturing; m icropore radius; modified multigridmethod;