Hideki OTSUKINiCTeiji@nict.go.jp.ppt

GMPLS inter-carriers E-NNI working and testbed on JGN2 Kei-han-na info-communication open lab.organization Kei-Han-Na GMPLS Inter-operability WG Projects PJ1 GMPLS Equipment interoperability (multi vendor) Protocol interoperability RSVP-TE, OSPF-TE, LMP Multilayer connectivities IP/Photonic TDM/Photonic PJ2 E-NNI physical interface 10GbE on OTN PJ3 E-NNI logical interface Control plane PJ4 Nationwide E-NNI Experiment The Goal of each Project Issues for E-NNI interoperability Routing information with TE For the end to end path Carrier network architecture IETF model - ASON/OIF model Interoperability of equipments Multi-vendor environment Kei-han-na open lab. IWG Interoperability Working Group (project ENNI C-plane Focused to ASON-IETF network model conversion between careers Routing protocol for scalability and TE Why we need a prototype Neutral implementation in IWG We need source code for quick update Function for message translation for interoperability PC base (we don’t need special equipments) Model conversion of single/multi sessions GUNI object is used in the E-NNI section Source and destination addresses are modified at E-NNI control nodes ERO is re-calculated at ENNI node ENNI between GMPLS networks GMPLS – GMPLS interoperability demonstration Routing of E-NNI section BGP has scalability compared with IGP’s Change TE information Separate C-plane and D-plane address Multi carrier field demonstration E-NNI prototype E-NNI signalling Interoperability for ITU-T/OIF based GMPLS and IETF based GMPLS Convert parameters, objects of messages Route calculation by CSPF and replacing ERO E-NNI routing BGP Routing Extension Advertising end terminal address with TE via carriers Conclusions IWG investigates GMPLS interoperability research and development. ASON-GMPLS interoperability is one of the scope. Linux based E-NNI prototype is introduced and it works well. Demonstrations are success with this prototype effectiveness. Acknowledges Members of Interop