常用工程塑料的性能特点与应用(比较全).xlsVIP

射出成型制程參數 surface roughness 公差等级应用范围 塑件公差 物理量常数 法定计量单位 公差数值表 不同加工方法和不同材料所能达到的表面粗糙度 自攻螺钉预制孔的参照表 常用材料密度 常用模具钢材对照表 部分塑胶的注塑（温度）条件 精致工艺必须满足条件表 塑胶的缩略语、英文、中文名一览表 塑料的燃烧特性试验 五金件价格 成型不良的原因及调节方法详解 成型不良要因表 常用塑胶的一般物性 塑料的简单辨别方法 燃烧鉴别 性能 特性应用 rad s All hardware / mechanisms shall not exhibit unexpected,distracting sounds 所有零部件/机械结构均无多余可视部分，无噪音 Cl-0003 All hardware / mechanisms / trim shall not exhibit unexpected movement,deflection,or efforts under intended customer usage scenarions 所有部件/ 机械结构/ 装饰件无不正常的松动、变形，或用户操作力不正常 Cl-0004 No customer perceived offensive odor 没有用户能感觉到的异味 Cl-0005 No component shall exhibit any visible rust at showroom condition as customer takes delivery 车辆交付用户时，无任何锈蚀 Cl-0006 Must have consistent margins,flushness,radii,and alignment of interfacing components in intended customer view fields零部件必须有一致的边缘、平整度、倒角半径，并且在用户可见的范围内部件必须对齐 Cl-0007 No visible parting lines on systems / components in intended customer view fields 在用户可视的范围内，无可视的零件分型线 Cl-0008 No exposed fasteners on trim components in intended customer view fields,except when required by design theme 在用户可视的范围之内无外露紧固件，设计风格要求除外 Cl-0009 Color,grain,and gloss must be compatibile between “like”and adjacent systems / components in accordance with design / styling theme.颜色、纹理、光泽相互之间必须互相协调，并和整车设计风格一致。 Cl-0010 Graphics,font,and illumination shall be compatible between “like” and adjacent systems / components in accordance with the design/styling theme. 图形、字体、照明之间必须互相协调，并和整车设计风格一致 Cl-0011 No customer perceived surface imperfections 没有用户能感觉到的表面不平整 Cl-0012 Customer perceived/actual functional components must operate as perceived or intended 用户用到的功能部件必须能直接感觉和意会其操作 Cl-0013 Components shoule function in an intuitive and logical manner 部件功能应能直接意会且符合逻辑常理 Cl-0014 Controls and functional trim must be easily reached and have sufficient clearances 控制和功能件应能易于接近且相互之间留有足够的操作空间 Cl-0015 Components,controls and displays shall be easily located and identified by the customer 部件、控制件和各种显示应当使用户易于发现、易于识别 精致工艺必须满足条件表 Base Line of Craftsmansh