DS18B20温度传感器(双路)输出显示.docVIP

DS18B20温度传感器(双路)输出显示 图 晶振电路系统设计图 图 温度系统设计图 图 液晶显示系统设计图 图 总计设计方案图 #includereg51.h #includeintrins.h #define uchar unsigned char #define uint unsigned int #define delayNOP() {_nop_();_nop_();_nop_();_nop_();} sbit DQ=P3^3; sbit DQ2=P3^2; sbit LCD_RS=P2^0; sbit LCD_RW=P2^1; sbit LCD_EN=P2^2; sbit LED1=P1^0; sbit LED2=P1^1; uchar Current_Temp_Display_Buffer[] = {Temp: }; uchar Current_Temp_Display_Buffer2[] = {Temp2: }; uchar code Temperature_Char[8]={0x0c,0x12,0x12,0x0c,0x00,0x00,0x00,0x00}; uchar code df_Table[]={0,1,1,2,3,3,4,4,5,6,6,7,8,8,9,9}; uchar CurrentT=0; uchar Temp_Value[]={0x00,0x00}; uchar Display_Digit[]={0,0,0,0}; bit DS18B20_IS_OK=1; uchar CurrentT2=0; uchar Temp_Value2[]={0x00,0x00}; uchar Display_Digit2[]={0,0,0,0}; bit DS18B20_IS_OK2=1; //延ó时骸? void DelayXus(int x) { uchar i; while(x--)for(i=0;i200;i++); } //LCD忙|等台?待鋣 bit LCD_Busy_Check() { bit result; LCD_RS=0; LCD_RW=1; LCD_EN=1; delayNOP(); result=(bit)(P00x80); LCD_EN=0; return result; } //写′指?令?，?写′数簓据Y void Write_LCD_Command(uchar cmd) { while(LCD_Busy_Check()); LCD_RS=0;LCD_RW=0;LCD_EN=0;_nop_();_nop_(); P0=cmd;delayNOP(); LCD_EN=1;delayNOP();LCD_EN=0; } void Write_LCD_Data(uchar dat) { while(LCD_Busy_Check()); LCD_RS=1;LCD_RW=0;LCD_EN=0; P0=dat;delayNOP(); LCD_EN=1;delayNOP();LCD_EN=0; } void LCD_Initialise() { Write_LCD_Command(0x01);DelayXus(5); Write_LCD_Command(0x38);DelayXus(5); Write_LCD_Command(0x0c);DelayXus(5); Write_LCD_Command(0x06);DelayXus(5); } void Set_LCD_POS(uchar pos) { Write_LCD_Command(pos|0x80); } void Delay(uint x) { while(--x); } //初?始?化ˉ uchar Init_DS18B20() { uchar status; DQ=1;Delay(8);DQ=0;Delay(90);DQ=1;Delay(8); status=DQ;Delay(100); DQ=1; return status; } uchar Init_DS18B202() { uchar status; DQ2=1;Delay(8);DQ2=0;Delay(90);DQ2=1;Delay(8); status=DQ2;Delay(100); DQ2=1; return status; } //读á一?字?节ú uchar ReadOneByte() { uchar i,dat=0; DQ=1;_nop_(); for(i=0;i