油气储运毕业设计.doc

序号： 毕 业 设 计（论 文） （ 届） 题 目：学 生：学院：专 业 班 级：指导师：指导师： 二○○苏北商贸公司石化储运库工艺设计 摘要：本设计是为年销售量为75万吨的油库进行的工艺及其消防系统设计，设计工程为周边地区提供优越的油品储存与转输条件。设计分为文字部分和图纸部分。文字部分以计算说明为重点,在计算说明中，本人首先计算出各类品量油罐，类型和数量。然后，我，包括油库罐区，泵房，管道，阀门，道路，公路和水调度地区，，消防系统等。计算部分包括石油产品由陆路和水和系统，我也考虑。  The technical process design of Petrochemical Storage library for the commerce company of Subei Abstract: this project was technical process and fire fighting system design for oil depot which business sale scale is 750000 t/a,This design will provide better preservation and transportation of petroleum ways in this district. The design is divided into two parts: account for the engineer and blueprint. In the account for the engineer,I firstly calculated storage capacity for all kinds of products and selected oil tank’s volume, type and number. Then I performed relative arrangement for all parts of the depot including tank farm, pump house, pipelines, valves, roads, dispatching area by road and by water way, management buildings, fire fighting system and so on. The calculation parts include the water head loss calculations for petroleum products receiving and dispatching by road and by water way and for fire fighting system. The drawing parts include the arrangement of oil depot, technical process diagrams for oil receiving and dispatching, the installation of pipelines in dispatch area, technical process of fire fighting system, and lastly pump house installation.In additional, I also consider automatic control system instrument selection for the oil depot operation in this project as possible. Key words oil depot technological process fire fighting system pump house installation design 目 录 摘要 …..…………………………………………………………………………….I 目录 III 绪 论 1 1 库址选择及基本要求 2 2 总平面布置 3 2.1 概述 3 2.2 总平面图布置原则 3 2.3 平面布置 3 2.3.1 水运装卸区布置 3 2.3.2 公路装卸区的布置 3 2.3.3 储油区布置 3 2.4 周转系数确定 5 2.5 油罐储存系数确定 6 2.6 各油品设计容量计算 6 2.7 各油品的计算容量 6 2.8 各种油品罐型、个数确定 6 2.8.1 罐型确定 7 2.8.2 油罐个数确定 7 2.9 油库容量、等级确定 7 2.10 各油罐区布置确定及尺寸大小的计算 8 2.10.1 汽油和