爱立信 北方区 网优试题.pptVIP

测试题解答 爱立信（中国）北方区NTC 付士友 第一部分：填空题 掉话的定义 爱立信交换机对掉话总次数(TFNDROP)的统计定义是: 当BSC向MSC发”CLEAR REQUEST”时，会使TFNDROP加1． 或者是BSC收到MSC送来的不是因为“CALL CONTROL”或者是“Handover successful”而产生的“CLEAR COMMAND”信息，也会使TFNDROP加一．但如果是由BSC先发“CLEAR REQUEST“，MSC再向BSC发“CLEAR COMMAND“的这种情况，则不会使TFNDROP加1． 掉话计数器的分类及判断顺序 在爱立信交换机里，当掉话产生即CLEAR REQUEST发送到MSC时，交换机将会以下面的优先顺序去检查紧急状态（Urgency state）, 从而判断应该增加哪一个掉话计数器 Excessive TA Low signal strength in downlink and/or uplink Bad quality in downlink and/or uplink Sudden loss of connection Other reason Identities in GPRS IMSI P-TMSI is allocated by SGSN. NSAPI and TLLI are used for network layer routing. TID is used by the GTP between GSNs to identify a PDP context. A TID consists of an IMSI and an NSAPI. The combination of IMSI and NSAPI uniquely identifies a single PDP context. RAI = LAI + RAC APN GPRS Attachperformed when the MS indicate its presence to the PLMN for the purpose of using GPRS ptp services.The MS identifies itself with its GSM identity (IMSI and TLLI)TLLI is derived from P-TMSI allocated by SGSN 第二部分：判断题 Frequency bands for the different GSM-based networks Multiplexing of BCCH + CCCH + 4 SDCCH/4 on TS0 第四部分：多选题 Um layer 3, distribution of signaling functions SYSTEM INFORMATION TYPE 1 When frequency hopping is used on the SDCCH in a cell or for cells with Immediate Assignment on traffic channel and frequency hopping, the MS needs to know which frequency band to use and which frequencies within the band it should use during frequency hopping. This information is provided in the cell channel description information element sent in system information type 1. Information is also provided instructing the MS how to perform access to the system. This information is provided in the RACH control parameters information element and is sent in system information type 2, 2 bis, 3 and 4 as well. CA-NO The cell allocation number shows which band is used. The CA_NOcan have the value 0, 1 or 2. CA-NO=0 denotes GSM 900 CA-NO=1 means E-GSM CA-NO=2