0408 获得远程设备信息.pptVIP

目标 通过本章的学习，你将能做到以下内容： 给定一个Cisco交换机和路由器,使用Telnet 命令来连接到远程设备 给定一个使用Cisco交换机和路由器,IOS 命令来管理Telnet会话 使用Telnet 连接到远程设备 观察Telnet 连接 Telnet 会话之间的切换 关闭Telnet会话 使用 ping 和trace 命令 总结 Telnet是一个很有用的应用程序用来收集一些从CDP获取不到的信息. 一但连接到远程设备, 你可能想离开远程会话回到终端操作. Telnet允许你在本地和远程设备设备之间切换. 通过使用exit, logout, disconnect, 或clear命令在Cisco设备上终止Telnet会话. ping 和 trace命令提供了到达远程设备的连接性和路径的信息. ? 2004,Enhan info, Inc. All rights reserved. ? 2002, Cisco Systems, Inc. All rights reserved. ? 2002, Cisco Systems, Inc. All rights reserved. ? 2004,Enhan info, Inc. All rights reserved. ? 2002, Cisco Systems, Inc. All rights reserved. * 收集远程设备的信息 测试到远程设备的联通性和路径 Router###ping 0 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 0, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 4/4/4 ms Router#trace 01 Type escape sequence to abort. Tracing the route to 01 1 p1r1 (9) 20 msec 16 msec 16 msec 2 p1r2 (8) 48 msec * 44 msec Router# Purpose: This chapter introduces the Cisco IOS? CLI on the Catalyst? 1900 switch and router. Timing: This chapter should take about 2 hours to present. Note: The Catalyst 1900 switch only has a subset of the router Cisco IOS commands available. Contents: Introduction to Cisco IOS. Explain to the student what is IOS? Cisco Device startup procedures in general. IOS configuration source. General introduction to the IOS CLI. Cat 1900 switch startup procedures. Intro to Cat 1900 CLI. This part covers the basic configuration on the switch, like setting the IP address and hostname. More details about the various Cat 1900 switch configuration commands are explained in Chapter 6 and 7. Router startup procedures. More details on the router startup process is discussed in chapter 5. Router IOS CLI. Slide 1 of 2 Purpose: This slide states the chapter objectives. Emphasize: Read or state each objective so that each student has a clear understanding of the chapter objectives. Note: Catalyst switches have different CLIs. The Cat