MF_RC522_射频识别参考程序注释new.docVIP

MF RC522 射频识别参考程序注释 串口读取的数据 //------------------------------------------ ucAddr = ((Address1)0x7E)|0x80;//变化成有效的地址形式，最低位为0，最高位为1时候时，从MFRC522读出数据，最低位为0，最高位为0时候时，往MFRC522写数据，参考39页 // 读SPI数据 //------------------------------------------ unsigned char SPIReadByte(void) { unsigned char data SPICount; // Counter used to clock out the data unsigned char data SPIData; SPIData = 0; for (SPICount = 0; SPICount 8; SPICount++) // Prepare to clock in the data to be read { SPIData =1; // Rotate the data CLR_SPI_CK; nop();nop(); // Raise the clock to clock the data out of the MAX7456 if(STU_SPI_MISO) { SPIData|=0x01; } SET_SPI_CK; nop();nop(); // Drop the clock ready for the next bit } // and loop back return (SPIData); // Finally return the read data } //------------------------------------------ // 写SPI数据 //------------------------------------------ void SPIWriteByte(unsigned char data SPIData) { unsigned char data SPICount; // Counter used to clock out the data for (SPICount = 0; SPICount 8; SPICount++) { if (SPIData 0x80) { SET_SPI_MOSI; } else { CLR_SPI_MOSI; } nop();nop(); CLR_SPI_CK;nop();nop(); SET_SPI_CK;nop();nop(); SPIData = 1; } } ///////////////////////////////////////////////////////////////////// //功 能：寻卡 //参数说明: req_code[IN]:寻卡方式 // 0x52 = 寻感应区内所有符合14443A标准的卡 // 0x26 = 寻未进入休眠状态的卡 // pTagType[OUT]：卡片类型代码 // 0x4400 = Mifare_UltraLight // 0x0400 = Mifare_One(S50) // 0x0200 = Mifare_One(S70) // 0x080