Architectural Drawing.ppt

Architectural Layer Standards Architectural Layer Standards Architectural Layer Standards Architectural Layer Standards Architectural Layer Standards Architectural Layer Standards Architectural Layer Standards Architectural Layer Standards Architectural Layer Standards Architectural Drawing Architectural Layer Standards General The CAD Layer Guidelines are organized as hierarchy. This arrangement accommodates expansion and addition 0f user-defined extensions to the layer list. Layer names are alphanumeric and use abbreviations that are easy to remember. This legibility is particularly important when CAD files are distributed among architects, consultants, and clients. Layer names consist of a Discipline Code-Major Group-Minor Group-Status Field. The format for the CAD Standard is as follows: Discipline Code Discipline is the primary method of classification for layer names. The discipline code provides a path back to the originator of the data and provides a logical categorization of CAD information. The discipline code is intended primarily to identify the author of the graphic information. Thus, a structural column placed by an architect would be A-COLS rather than S-COLS. The existence of both sets of information can in fact indicate the need for coordination. The Discipline Code is a one or two-character field with the second character either a hyphen or a user-defined modifier. The discipline codes are listed below. A Architectural M Mechanical C Civil P Plumbing E Electrical Q Equipment F Fire Protection R Resource G General S Structural H Hazardous Materials T Telecommunications I Interiors X Other L Landscape Z Contractor/shop Drawings Major Group The Major Group designation identifies the building system. This field must contain four characters. Although Major Groups are logically grouped with specific discipline codes, it is possible to combine Major Groups with any of the Discipline Codes. For example, a drawing might cont