机械毕业设计（论文）-基于PT100的喷油泵温度测量仪设计.docVIP

毕 业 设 计 题目：基于PT100的喷油泵温度测量仪设计 姓　 名： 学　 号： 2012090427089 学 院： 机电学院 专 业： 机械工程及自动化 指 导 教 师： 协助指导教师： 2014年 5 月 8 日 毕业设计（论文）诚信承诺书 本人慎重承诺和声明,在毕业设计（论文）活动中遵守学校有关规定，恪守学术规范，在本人的毕业设计（论文）内容除特别注明和引用外，均为本人观点，不存在剽窃、抄袭他人的学术观点、思想和成果，不存在伪造、篡改实验数据。如有违规行为发生我愿承担一切责任，接受学校的处理，并承担相应的法律责任。 学生（签名）： 年 月 日 摘 要 喷油泵PT100喷油泵温度测量仪的设计。本温度监测仪采用AT89S52单片机作为控制核心，辅以信号采集电路，信号调理电路，时钟电路，按键切换电路，LED数码显示电路以及串行存储器电路共同作用实现对喷油泵的温度进行实时监测。并采用恒流源方法进行测温，将温度精度控制在0℃~120℃范围内±0.1℃。还编制了相应的信号采集、时钟、按键、显示、PT100 单片机Abstract Injection pump oil will continue to increase in the course of their work, or even abnormal fluctuations, temperature changes have a significant impact on the basin pump performance, and even cause a major accident. With the continuous development of industrial technology progress, fuel pump temperature control and more attention-site operator, so the temperature of the fuel pump on testing methods and techniques is still the focus of the industry. This paper first introduces the fuel pump temperature monitor works, on this basis are discussed in detail based on the injection pump PT100 temperature measuring instrument design. Monitor the temperature control using AT89S52 microcontroller as the core , supplemented by signal acquisition circuitry , signal conditioning circuits , clock circuits , key switching circuit , LED digital display circuit and serial memory circuits work together to achieve real-time monitoring of the temperature of the fuel pump . And the method of temperature measurement using a constant current source , the temperature is controlled within the range of accuracy 0 ℃ ~ 120 ℃ ± 0.1 ℃. Also prepared a corresponding signal acquisition subprogram, subroutine clock , key switch subroutine , digital display routine , abnormal temperature records are stored subroutines and the main program control functions with hardware design requirements . The system features are: measuring range,