电气设备检验和调试.docVIP

GENERAL SPECIFICATION CHECK-OUT AND COMMISSIONING OF ELECTRICAL EQUIPMENT CACT-NONE-S-F993-E003 TABLE OF CONTENTS 1. SCOPE 4 2. APPLICABLE STANDARDS AND SPECIFICATIONS 4 3. REQUIREMENTS 4 3.1 Item Definition 4 3.2 CONTRACTOR Responsibilities 5 3.3 Equipment Checking and Testing 6 3.4 Standards of Testing 13 3.5 Safety 13 3.6 Documentation 16 4. QUALITY ASSURANCE PROVISIONS 17 4.1 General 17 4.2 Special Tests and Examinations 17 4.3 Quality Conformance Inspection 18 5. DEFINITIONS 18 Attachment 1 Test Equipment Required 20 Attachment 2 Check List For Inspection And Testing Of High-Voltage Motors (Above 600 Volts) 22 Attachment 3 Check List For Inspection And Testing Of Low-Voltage Motors (Below 600 Volts) 23 Attachment 4 Check List For Inspection And Testing Of Transformers 24 Attachment 5 Check List For Inspection And Testing Of High-Voltage Contactors (Above 600 Volts) 25 Attachment 6 Check List For Inspection And Testing Of Low-Voltage Contactors (Up To And Including 600 Volts) 26 Attachment 7 Check List For Inspection And Testing Of Switchgear 27 Attachment 8 Check List For Inspection And Testing Of Switchgear Air Circuit Breakers 28 Attachment 9 Check List For Inspection And Testing Of Grounding System 29 Attachment 10 Check List For Inspection And Testing Of Lighting Installations 30 Attachment 11 Check List For Inspection And Testing Of Cables 31 Attachment 11 (Continued) Hi-Pot Test Table 32 Attachment 12 Electrical Work Permit 33 Attachment 13 Electrical Discrepancy List 34 SCOPE 摘要 This specification covers the minimum technical requirements for module and onsite checkout and commissioning of electrical equipment. The intended user of this specification is the electrical CONTRACTOR who will accomplish the checkout and commissioning. 本规格书包括电气设备检查和调试的最低技术要求。规格书的使用者是进行检查和调试的电气承包商。 This checkout and commissioning specification is generally applicable to offshore production platforms. Any exceptions to the requirements of this sp