弓长岭何家采区开采方案优化实施.pdfVIP

弓长岭何家采区开采方案优化与实施 ·1 · 弓长岭何家采区开采方案优化与实施 贾建军 韩连生 米红军 郭志东 赵俊英 (鞍钢集团矿业公司，鞍山 114002) 摘 要 弓矿露天铁矿何家采区进入深部扩建开采后逐步发现高山后部与端部等区域的矿体赋存情况与原设计有 较大变化，原设计开拓运输系统存在诸多不合理。本文在科学分析采场布局的基础上，借助矿床三维建模技术建立 起具有国内矿山先进水平的“雕刻法”三维实体矿体地质模型，拓展了对矿体空间形态及其变化规律的认识，利用 三维矿床模型创造性地采用几何定界法并结合“浮锥排除法”重新圈定露天开采境界并进行系统优化，同时对开拓 运输系统进行了优化调整，大大提高了资源开发利用率，降低了生产成本，取得了良好成效。 关键词 露天开采境界 几何定界法 方案优化 Gongchangling Hejia Mining Plan Optimization and Implementation Jia Jianjun Han Liansheng Mi Hongjun Guo Zhidong Zhao Junying (Anshan Iron and Steel Group Corporation Mineral Company, Anshan, 114002) Abstract Hejia area of Gongchangling open-pit mine enter the deep extension mining.We gradually found orebody occurrence at the rear end of mountains and regional changes greatly with the original design, original design development and transportation system has many unreasonable. Based on the scientific analysis on the basis of stope layout, with the help of deposit modeling technology to establish a domestic advanced level of the mine engraving 3D geological model, expanded understanding of orebody spatial morphology and its variation, and the geometry and bound method creatively combined with the floating cone exclusion method to delineate open-pit mining realm and system optimization using the 3D deposit model, at the same time, development and transportation system has been optimized, greatly improving the utilization rate of resources, reduce the cost of production, and achieved good results. Key words open pit boundary, geometric and bound method, scheme optimization 1 概述 鞍钢集团矿业公司弓矿公司露天铁矿何家采区是目前弓矿公司最大的露天采区，采区位于辽阳市弓长岭 区岭东矿区，其前身为高山采区，开采主体为弓长岭一矿区，为典型的鞍山式沉积变质铁矿床。采场采用水 平台阶逐层采剥工艺，设计铁矿石生产能力400 万吨/年，其中贫磁铁矿30