机械毕业设计（论文）-QD20t-25.5m箱形双梁桥式起重机主梁及端梁设计【全套图纸】.doc

河 北 建 筑 工 程 学 院 本科毕业设计（论文） 题 目 QD20t-25.5m箱形双梁桥式起重机 主梁及端梁设计 全套图纸，加153893706 学 科 专 业 机械设计制造及其自动化 班 级 机094班 姓 名 指 导 教 师 辅 导 教 师 摘要 桥式起重机的梁有多种结构，本设计采用箱形双梁结构。主梁跨度25.5m ,是由上、下盖板和两块垂直的腹板组成封闭箱形截面实体板梁连接。因本设计的起重量比较大，故主梁内部设置横纵加劲板，以保证主梁桥架受载后的稳定性。 端梁部分在起重机中有着重要的作用，它是承载平移运输的关键部件。端梁部分是由车轮组合端梁架组成，端梁部分主要有上盖板，腹板和下盖板组成；端梁是由两段通过连接板和角钢用高强螺栓连接而成。在端梁的内部设有加强筋，以保证端梁架受载后的稳定性。 本设计大车运行机构部分采用分别驱动，分别驱动省去了中间部分的传动轴，使得质量减轻，尺寸减小。分别驱动的结构不因主梁的变形而在大车传动性机能方面受到影响，从而保证了运行机构多方面的可靠性。所以，大车运行机构采用分别驱动。 设计中参考了各种资料, 运用各种途径, 努力利用各种条件来完成此次设计。本设计通过反复斟酌各种设计方案, 认真讨论, 不断反复校核, 力求设计合理;通过采取计算机辅助设计方法以及参考前人的先进经验, 力求有所创新;通过计算机辅助设计方法, 绘图和设计计算都充分发挥计算机的强大辅助功能, 力求设计高效。 关键词:箱形双梁 桥式起重机 主梁 端梁 ABSTRACT The beam has a variety of structure of bridge crane，This design uses the box beam structure. Girder span 25.5 m, is composed of upper and lower cover plate and two vertical web form closed entity board box section beam connection. Because the weight is large since the design of main girder internal setting transverse and longitudinal stiffening plate, to ensure the stability of the main girder bridge frame after loading. Beam section has an important role in the crane, it is the key of the carrying truck transportation parts. Beam section is made up by the wheels of side beams, beam of a cover plate, web plate and the lower cover plate; Beam is made up of two paragraphs by connecting plate and Angle iron with high strength bolt connection and into. In the end beam with internal stiffeners, to ensure the stability of side beams after loading. This part adopts respectively drive design supporting institutions, respectively to drive out the middle part of the drive shaft, make the quality to reduce, reduce the size. Respectively drive structure is not due to deformation of the girder in cart driving function of sex is affected, thus ensuring the reliability of the operation aspects. So, cart running mechanism