毕业设计（论文）-北京某18层大厦通风空调工程设计【全套图纸】.doc

沈阳建筑大学 毕业设计说明书 全套图纸，加153893706 毕 业 设 计 题 目 北京腾达18层大厦通风空调工程设计 学院专业班级市政与环境工程学院建筑环境与设备工程 班 学 生 姓 名 性别 男 指 导 教 师 职称 高工 20XX年6月20日摘要 本设计为北京市腾达大厦通风空调工程设计，该大厦为一所集办公、商务等多功能为一体的综合性建筑。本设计根据建筑特点及甲方要求进行了合理的方案论证及设计。本说明书对空调系统冷、热负荷，新风量、新风负荷，处理过程，气流组织，空调风系统及空调水系统进行了合理的计算，并以此为依据，根据设计手册进行了技术经济比，选择了制冷机组，换热器，循环水泵，空调机组，风机盘管，冷却塔等设备及其附属设备的选型。本工程夏季采用冷水机组集中制冷，冬季热源为市政管网热水为本建筑提供热水。 活动中心大面积公用场所采用全空气系统，采用回风管回风，系统中设置了排风机以便过渡季节全新风运行节约电能消耗；对于其它小型办公室等需要灵活调节的房间采用风机盘管加新风系统，便于节能；卫生间安装排气扇；电梯前室设置正压送风系统，风机出口进行了噪声控制。 最后，对本设计进行了风、水平面图、水系统图、机房原理图的绘制。本设计均以相关空调、采暖和通风规范和最新的节能标准为依据结合实践，在保证施工与系统运行经济性的前提条件下，能够使建筑内达到舒适性空调的标准，可保障空调系统正常有效地运行。 关键词： 负荷 全空气系统 风机盘管+新风系统 节能 冷热源 Abstract This design is an ventilation and air-conditioning system for tengda building in Beijing. The building is a multiple building with business mansion 、working etc. together. The detailed contents in the specification consist of the calculation of cooling load, heating load, fresh air quantity, air transport system and water transport system of the air-conditioning system. Considering the ratio of economy to technology, the designer chooses the refrigerating machine, the heat exchanger, the circulating pump, the packaged air conditioner, the cooling tower, the fan coil unit and relevant assist equipment according to the calculation. The screw compressor will satisfy the cooling load in summer, and the hot water through the plate heat exchanger will serve the heating load in winter. The all air-conditioning system is used to serve the spacious room such as the hall, the shopping market, and the dining-room on the lower stories; the rooms which need to adjust to energy-saving such as guest room and entertainment room are served with fan coil unit with fresh air; exhausting system is used in the dining-room, the bathroom and the toilet for better indoor air quality. The corridors in the third to eighth floor are more than 60