毕业设计（论文）-驱动桥锁片冲压模具设计【全套图纸】.doc

南 京 工 程 学 院 毕业设计说明书(论文) 全套图纸，加153893706 作 者： 学 号 学 院： 专 业： 数控加工与模具设计 题 目： 驱动桥锁片冲压模具设计 指导者： 评阅者： 2012 年 4 月 淮 安 毕业设计说明书（论文）中文摘要 随着生产现代化程度的不断提高，人们对汽车的消费不断增加，市场对驱动桥的需求也越来越大，驱动桥产品的市场前景十分广阔。随着国内企业市场意识逐步增强，行业竞争力将不断加剧。因此，一种安全、低成本、使用寿命长的驱动桥锁片生产技术已越来越迫切。 本文对驱动桥锁片的冲压模具进行了设计，对冲压件的工艺进行了设计和计算。对模具的零件进行了设计，给出了零件图和模具装配图，最后，对模具主要零件的加工工艺进行了分析。该零件采用复合模进行加工，只需一副模具，冲压件的形状精度和尺寸精度容易保证，生产效率高。此模具不采用侧压装置，为了补偿因进料过程中条料摆动而导致的侧面搭边值的减小，条料宽度应增加一个摆动量。 本方案设计简单，结构紧凑，减少了产品制造工序，提高了零件精度。 关键词 驱动桥锁片 复合模 冲压件 摆动量 毕业设计说明书（论文）外文摘要 Title Stamping Mould Design of Driving Axle Lock Abstract With the continuous improvement of modern production, the consumption amount of the car is continuously increasing, and the market demand is also growing on the drive axle, the market prospect of drive axle products is very broad. With the market awareness of domestic enterprises gradually increases, the competitiveness of the industry is growing. Therefore, a safe, low-cost, long using life drive axle lock production technology has become increasingly urgent. Stamping die of the driving axle lock is designed in this paper, stamping process of this part is designed and calculated. The parts of the mold is designed, at the same time, the parts drawing and mold assembly drawing are drawn, at last, the main parts processing technology of the mold is analyzed. The part is processed by compound modulus, just one mold, the shape and dimensional accuracy are easy to ensure, the production efficiency of the mould is high. This mold The side pressure device is not necessary in this mould, in order to compensate for side cutting-building side value of the feeding process due to the strip swing, the strip width should be increased by a swing unit. The design of this mould is simple, and the structure is very compact, the