两级振动隔振系统参数优化设计_魏燕定.pdfVIP

第40 卷第5 期 浙 江 大 学 学 报( ) Vol.40 o. 5 2006 年5 月 Journal of Zhejiang University(Engineering Science) May 2006 1 1 1 2 魏燕定, 赖小波, 陈定中, 沈国强 ( 1. 浙江大学 现代制造工程研究所,浙江 杭州 310027; 2. 杭州电子科技大学 机电工程学院, 浙江 杭州 310018) : 针对两级隔振系统参数优化问题, 引入最大熵优化方法, 并结合遗传算法, 提出了两级隔振系统参数优化 设计的一种混合数值方法,并用此方法对两级隔振系统进行了单维及多维参数优化设计, 优化后的两级隔振系统 隔振性能大大提高,并且随着优化参数的增加, 系统隔振性能也越好, 表明该方法是合理有效的. 该方法作为一种 数值方法,适用于多目标及复杂结构的优化. : 两级隔振系统; 优化;遗传算法; 最大熵方法 : TH 113. 1 : A : 1008 973X(2006)05 0893 04 Optimal parameters design of two- stage vibration isolation system 1 1 1 2 WEI Yan-ding , LAI Xiao-bo , CHE Ding-zhong , SHE Guo-qiang ( 1. Institute of Modern Manuf acture Engineering, Zhej iang University , H angzhou 310027, China; 2. College of Electromechanical Eng ineering, H angzhou ianzi University , H angzhou 310018, China) Abstract: T o study optimization of parameters for two-stage vibration isolation system, anew optimization methodin which maximum entropy approach combined with genetic algorithms was developed and used to optimize single and multi parameters of two-stage vibration isolation system. The efficiency of vibration -i solation is improved effectively after optimization and efficiency is enhanced with increasing optimized pa- rameters which shows that the proposed method is viable and effective and it is suitablefor use in the opt-i mization of mult-i objective and complex structure. Key words: two-stage vibration isolation system; optimization; genetic algorithm; maximum entropy 某些高精度仪器必须在振动强度极低的环境 一处理所有形式约束, 减少了由于约束分别处理引 工作, 很多情况下, 单级隔振系统不能满足精度要 起的算法复杂性, 算法简单有效,