毕业设计（论文）-大油壶盖注塑模具设计说明书.doc

毕 业 设 计（论 文）说 明 书 题 目 大油壶盖注塑模具设计 学 生 系 别 机 电 工 程 系 专 业 班 级 材料成型及控制工程1班 摘 要 本文是关于注塑模具的设计This is the lard on the handle of the plastic injection mold design, which is mainly aimed at the Molding of Automatic Screw methods. I choice the most simple structure must Abstracts -- pits trial nozzle mold on the basis of The correct analysis of the characteristics of plastic parts and the performance of HDPE. This article includes the design process of thread core, die, casting system, stripping institutions, the selection criteria parts, and the non-standard pieces . It also involve many Project Operational issues :mold structure, strength, life calculation and forecast the flow of melting plastic in the mold. At the same time, analyses the design, manufacture and product quality of the mold with (CAD), aided manufacturing (CAM), aided engineering (CAE) software in a wide variety. In the design process ,I use CAD, CAE and CAM to design or analysis the injection mold parts of the molding, casting systems, components ,guidance Demoulding institutions and so on ,following the usual precision . I use the expertise integratedly in the design process too,while the Core Knowledge is the plastic mold, molding material and technological foundation for mechanical design, plastic molding technology, computer-aided design, CAD \ CAM \ CAE, etc.. Key word: Fusing plastic heat insulation flow channel thread core, long lead screw, drawing of patterns organization. 目录 中文摘要 ……………………………………………………………………………………Ⅰ 英文摘要 ……………………………………………………………………………………Ⅱ 第一章 概述 ……………………………………………………………………………… 1 1.1国际塑料模具工业的发展的新动态 ………………………………………………… 1 1.2我国模具工业发展现状 …………………………………………………………… 3 1.3我国模具设计技术今后发展方向 …………………………………………………… 5 1.4毕业设计课题资料查询……………………………………………………………… 5 1.4.1分析塑件结构及工艺技术要求 ……………………………