桩筏基础中筏板厚度的确定.pdfVIP

第 7 卷第 4 期 水利与建筑工程学报 Vol. 7 No. 4 2 0 0 9 年 1 2 月 Journal of Water Resources and Architectural Engineering Dec . , 2 0 0 9 　 桩筏基础中筏板厚度的确定 杨 建 林1 ,2 ( 1. 江苏联合职业技术学院 常州建设分院 , 江苏 常州 213016 ; 2. 江苏城建校建筑规划设计院 , 江苏 常州 213002) 摘 　要 : 桩筏基础中筏板厚度的确定需同时考虑承载能力极限状态和正常使用极限状态的相关要求 ; 设计操作中应利用变刚度调平的原则进行桩位布置 ,通过试算结果来调整桩位布置从而取得筏板基础 的合理厚度。并运用一框架剪力墙结构基础算例来说明筏板厚度试算确定法的适用性。 关键词 : 筏板厚度 ; 整体弯曲 ; 局部弯曲 ; 变刚度调平 ( ) 中图分类号: TU471. 15 　　　　 　文献标识码 : A 　　 文章编号 : 1672 —1144 2009 04 —0079 —04 Determining for Raftslab’s Thickness in Pileraft Foundation YANGJianlin1 ,2 ( 1. Changzhou Construction Branch of Jiangsu Union Vocational and Technical College , Changzhou , Jiangsu 213016 , China; ) 2. Architectural Planning and Design Institute of Jiangsu Vocational School of Urban Construction , Changzhou , Jiangsu 213002 , China Abstract : The determination of the raftslab’s thickness must consider the maximum loadbearing capacity as well as the related requirements under the normal operation limits ; so in the design stage , the principle of stiffness change should be employed in the pileposition arrangements , through the calculation results , the pile position could be rearranged , and in this way , the ratio nal thickness of the pileraft base is obtained. A calculation case of framed shearing wall basis is used to illustrate the