毕业设计（论文）-蔬菜大棚的温湿度控制系统设计.docVIP

摘要 温室大棚是设施农业的重要组成部分，大棚测控系统是实现大棚自动化、科学化的基本保证计算机应用技术的发展，使得用计算机控制的方面也涉及到各个领域，其中在大棚内用单片机控制是应用于实践的主要方面之一。通过对监测数据的分析，结合作物生长规律，控制环境条件，使作物达到优质、高产、高效的栽培目的。 对于蔬菜大棚来说，最重要的个管理因素是控制本设计是一个专门为大棚温湿度测量控制而设计的系统通过对系统的硬件部分和软件部分设计来达到监控要求。硬件部分实现了对模块温湿度模块、显示模块、的设计；软件部分主要根据系统的设计思想设计出了主程序和子程序流程图，并通过程序实现。在系统设计过程中充分考虑到性价比，选用价格低、性能稳定的元器件。系统具有性能好、操作方便等优点，能实现对温湿度的、控制和系统 The Design of Temperature and Humidity Control System in Vegetable Greenhouse Abstract Greenhouse is an important component of protected agriculture. Measuring and controlling system is the basis of the management automation in the greenhouse. In the traditional system is mainly rely on manual control mode, the consumption of both human and inaccurate, showed great limitations. With the development of computer application technology, the computer-controlled areas are also involved, the plastic temperature using SCM and humidity is one of the main aspects used in practice. Through the analysis of monitoring data, combined with crop growth, controlling environmental conditions, It makes greenhouse better, and more productive and high quality. For vegetable shed speaking, one of the most important management factor is the temperature and humidity control. Usually a control system of temperature and humidity,temperature and humidity control in greenhouse, to meet the needs of production, improve economic benefit. The?thesis is?about an intelligent system designed for controlling the temperature and humidity of a greenhouse. It can meet the demand of monitoring through the design of hardware and that of software in details. The former is more important in this dissertation, including Temperature and humidity measurement module, display module, control module, the alarm module. And according to the design thoughts the latter shows the flow chart of the main program and the subprogram, realized by program. In the system design process fully considering the price, low price, stable performance of the components. The system has the advan